is found. This finds the maximum temperature and the earliest time of day in which the temperature occurs, storing both as a single number.
Inputs:
coldsoaktanktemperature
Outputs:
peakhourofcoldsoak
Step: Calculate tankVaporGenerated for high and low altitudes. The time spans t1 (based upon ColdSoakInitialHourFraction.initialHourDayID) to t2 (based upon ColdSoakInitialHourFraction.hourDayID). tankVaporGenerated[high and low altitudes] = (tankSize*(1-tankFillFraction))*(tvgTermA*exp(tvgTermB*RVP)*(exp(tvgTermC*t2.coldSoakTankTemperature)-exp(tvgTermC*t1.coldSoakTankTemperature)))
Conditions:
t1.coldSoakTankTemperature < t2.coldSoakTankTemperature, 0 otherwise.
Inputs:
averagetankgasoline, coldsoakinitialhourfraction, coldsoaktanktemperature, hourday, monthofanyyear, peakhourofcoldsoak, stmytvvcoeffs, tankvaporgencoeffs
Outputs:
tankvaporgeneratedhighandlow
Step: Interpolate tankVaporGenerated based upon the county's barometric pressure. Don't allow negative values. Low altitude is based upon Wayne County, Michigan (26163) with a barometric pressure of 29.069. High altitude is based upon Denver County, Colorado (8031) with a barometric pressure of 24.087. tankVaporGenerated = greatest(((barometricPressure - 29.069) / (24.087 - 29.069)) * (high.tankVaporGenerated - low.tankVaporGenerated) + low.tankVaporGenerated,0).
Inputs:
county, tankvaporgeneratedhighandlow
Outputs:
tankvaporgenerated
Step: Calculated the ethanol weighted TVG using tankVaporGenerated for E10 fuel (t10) and that of E0 fuel (t0). ethanolWeightedTVG=(t10.tankVaporGenerated*(least(10.0,ETOHVolume)/10.0)+t0.tankVaporGenerated*(1.0-least(10.0,ETOHVolume)/10.0)).
Inputs:
averagetankgasoline, monthofanyyear, tankvaporgenerated
Outputs:
ethanolweightedtvgtemp
Step: Until now, ethanolWeightedTVG has been a cummulative total. Convert it to an hourly increment by subtracting the total of the previous hour. ethanolWeightedTVG[hourID]=ethanolWeightedTVG[hourID]-ethanolWeightedTVG[hourID-1].
Inputs:
ethanolweightedtvgtemp
Outputs:
ethanolweightedtvg
Step: tvgSumIH = Sum of TVG hourly from initial hour I to hour H
Inputs:
ethanolweightedtvg, hourday
Outputs:
tvgsumih
Step: tvgSumI24 = Sum of TVG hourly from initial hour I to the last hour of the day
Inputs:
ethanolweightedtvg, hourday
Outputs:
tvgsumi24
Step: tvgSum1H = Sum of TVG hourly from the first hour of the day to hour H
Inputs:
ethanolweightedtvg, hourday
Outputs:
tvgsum1h
Step: tvgSumH24 = Sum of TVG hourly from after hour H to the last hour of the day
Inputs:
ethanolweightedtvg, hourday
Outputs:
tvgsumh24
Step: TVGdaily[soakDayID=1] = tvgSumIH. Xn[soakDayID=1] = tvgSumIH.
Inputs:
ethanolweightedtvg, tvgsum1h, tvgsumh24, tvgsumih
Outputs:
tvg
Step: TVGdaily[soakDayID=2] = TVGdaily[soakDayID=1]. Xn[soakDayID=2] = ((1-backPurgeFactor)*least(tvgSumI24,averageCanisterCapacity))+tvgSum1H.
Inputs:
tvgsumi24
Outputs:
tvg
Step: TVGdaily[soakDayID>2] = TVGdaily[soakDayID-1]. Xn[soakDayID>2] = ((1-backPurgeFactor)*least(Xn[soakDayID-1] + tvgSumH24,averageCanisterCapacity))+tvgSum1H.
Outputs:
tvg
Step: Include leaking using database-driven TVV and Leak equations. tankVaporVented = (1-leakFraction)*(TVV equation) + leakFraction*(Leak equation). tankVaporVentedIM = (1-leakFractionIM)*(TVV equation) + leakFractionIM*(Leak equation).
Inputs:
agecategory, hourday, stmytvvequations, tvg
Outputs:
cummulativetankvaporvented
Step: unweightedHourlyTVV = tankVaporVented[hourID] - tankVaporVented[hourID-1]. unweightedHourlyTVVIM = tankVaporVentedIM[hourID] - tankVaporVentedIM[hourID-1].
Conditions:
only when coldSoakTankTemperature[hourID] > coldSoakTankTemperature[hourID-1], 0 otherwise.
Inputs:
coldsoaktanktemperature, cummulativetankvaporvented
Outputs:
unweightedhourlytvv
Step: Add coldSoakInitialHourFraction entries for soaking days beyond the first day
Inputs:
hourday, samplevehiclesoaking
Outputs:
coldsoakinitialhourfraction
Step: hourlyTVV = unweightedHourlyTVV * coldSoakInitialHourFraction. hourlyTVVIM = unweightedHourlyTVVIM * coldSoakInitialHourFraction.
Inputs:
coldsoakinitialhourfraction, unweightedhourlytvv
Outputs:
hourlytvvtemp
Step: hourlyTVV = sum(hourlyTVV). hourlyTVVIM = sum(hourlyTVVIM).
Inputs:
hourlytvvtemp
Outputs:
hourlytvv
Step: Reduce TVV emissions for hours past the hour with the peak temperature. hourlyTVV(with and without I/M) = hourlyTVV(with and without I/M) * (0 when >= 5 hours past the peak, 0.0005 when >= 4 hours, 0.0040 when >= 3 hours, 0.0100 when >= 2 hours, 0.0200 when >= 1 hour, 1.0 otherwise).
Inputs:
copyofhourlytvv, hourday, peakhourofcoldsoak
Outputs:
hourlytvv
Step: THC rate[opModeID=151 cold soak]=sum(sourceBinActivityFraction * hourlyTVV). THC I/M rate[opModeID=151 cold soak]=sum(sourceBinActivityFraction * hourlyTVVIM).
Inputs:
fueltype, hourlytvv, pollutantprocessmodelyear, sourcebin, sourcebindistribution, sourcetypemodelyear
Outputs:
weightedmeanbaserate
Step: Find bounds on RVP-based operating and hot soak adjustments (opModeIDs 300 and 150).
Inputs:
evaprvptemperatureadjustment
Outputs:
evaprvptemperatureadjustmentsummary
Step: Linearly interpolate RVP adjustment terms for each entry in averageTankGasoline, where lowAdj is the evapRVPTemperatureAdjustment record such that lowAdj.RVP <= averageTankGasoline.RVP and highAdj is similar with highAdj.RVP > averageTankGasoline.RVP. adjustTerm3 = lowAdj.adjustTerm3 + (highAdj.adjustTerm3 - lowAdj.adjustTerm3)/(highAdj.RVP - lowAdj.RVP) * (atg.RVP - lowAdj.RVP)). adjustTerm2 = lowAdj.adjustTerm2 + (highAdj.adjustTerm2 - lowAdj.adjustTerm2)/(highAdj.RVP - lowAdj.RVP) * (atg.RVP - lowAdj.RVP). adjustTerm1 = lowAdj.adjustTerm1 + (highAdj.adjustTerm1 - lowAdj.adjustTerm1)/(highAdj.RVP - lowAdj.RVP) * (atg.RVP - lowAdj.RVP). adjustConstant = lowAdj.adjustConstant + (highAdj.adjustConstant - lowAdj.adjustConstant)/(highAdj.RVP - lowAdj.RVP) * (atg.RVP - lowAdj.RVP).
Inputs:
evaprvptemperatureadjustment, tempatg
Outputs:
averagetankgasoline
Step: Adjust hot soak (opModeID 150) and running (opModeID 300) by temperature and RVP effects. tempAdjustment[opModeID=300]= (tempAdjustTerm3*power(greatest(temperature,40.0),3) + tempAdjustTerm2*power(greatest(temperature,40.0),2) + tempAdjustTerm1*greatest(temperature,40.0) + tempAdjustConstant). tempAdjustment[opModeID=150]=1. rvpAdjustment[opModeID=300]=1 for temperature < 40F, otherwise for temperature >= 40F: (adjustTerm3*power(temperature,3) + adjustTerm2*power(temperature,2) + adjustTerm1*temperature + adjustConstant). rvpAdjustment[opModeID=150]=1. weightedMeanBaseRate=sum(sourceBinActivityFraction*meanBaseRate)*rvpAdjustment*tempAdjustment. weightedMeanBaseRateIM=sum(sourceBinActivityFraction*meanBaseRateIM)*rvpAdjustment*tempAdjustment.
Conditions:
Only Gasoline (1) and Ethanol (5) fuel types, all others have no adjustments in this step.
Inputs:
agecategory, averagetankgasoline, emissionratebyage, evaptemperatureadjustment, fueltype, hourday, pollutantprocessmodelyear, runspechourday, runspecsourcetype, sourcebin, sourcebindistribution, sourcetypemodelyear, zonemonthhour
Outputs:
weightedmeanbaserate
Step: Combine cold soaking (opModeID=151), hot soaking (150), and running (300) evaporative emissions. THC=weightedMeanBaseRate*sourceHours*opModeFraction. THC I/M=weightedMeanBaseRateIM*sourceHours*opModeFraction.
Inputs:
hourday, opmodedistribution, pollutantprocessassoc, sourcehours, weightedmeanbaserate
Outputs:
movesworkeroutput
Step: Apply I/M programs to the aggregat combination of cold soak, hot soaking, and running evap. THC=THC I/M*IMAdjustFract + THC*(1-IMAdjustFract).
Outputs:
imcoveragemergedungrouped, movesworkeroutput
Total Activity Generator
Total Activity Generator is a GENERATOR that executes at the YEAR level.
Total Activity Generator uses the following tables:
Total Activity Generator populates the following tables:
Total Activity Generator is expressed in these source code files:
- /gov/epa/otaq/moves/master/implementation/ghg/TotalActivityGenerator.java
Steps
The Total Activity Generator algorithm is as follows.
Step: baseYear = max(year) where year <= analysisYear and year is a base year.
Inputs:
year
Step: population = sourceTypePopulation * ageFraction.
Inputs:
SourceTypeAgeDistribution, SourceTypeYear
Outputs:
SourceTypeAgePopulation
Step: Grow the age 0 population. population[ageID=0,y] = (population[y-1]/migrationRate[y-1])*salesGrowthFactor[y]*migrationRate[y].
Inputs:
SourceTypeAgePopulation for year y-1, SourceTypeYear for year y, SourceTypeYear for year y-1
Outputs:
SourceTypeAgePopulation2
Step: Move the newly grown population to the main population table.
Inputs:
SourceTypeAgePopulation2
Outputs:
SourceTypeAgePopulation
Step: Grow the population for 1 <= ageID < 30. population[ageID,y] = population[y-1,ageID-1]*survivalRate[ageID]*migrationRate[y].
Inputs:
SourceTypeAge, SourceTypeAgePopulation for year y-1, SourceTypeYear for year y
Outputs:
SourceTypeAgePopulation2
Step: Grow the population ageID >= 30. population[ageID,y] = population[ageID=29,y-1]*survivalRate[ageID=29]*migrationRate[y] + population[ageID=30,y]*survivalRate[ageID=30]*migrationRate[y].
Inputs:
sta SourceTypeAge for ageID=29, sta2 SourceTypeAge for ageID=30, stap SourceTypeAgePopulation for year y-1 and ageID=29, stap2 SourceTypeAgePopulation for year y and ageID=30, sty SourceTypeYear for year y
Outputs:
SourceTypeAgePopulation2
Step: totalPopulation = sum(population).
Inputs:
sourceTypeagePopulation
Outputs:
sourceTypeAgePopulationTotal
Step: ageFraction = population/totalPopulation.
Inputs:
sourceTypeAgePopulation, sourceTypeAgePopulationTotal
Outputs:
sourceTypeAgeDistribution
Step: population[HPMSVTypeID] = sum(population[sourceTypeID]).
Inputs:
SourceTypeAgePopulation, SourceUseType
Outputs:
HPMSVTypePopulation
Step: FractionWithinHPMSVType = population[sourceTypeID]/population[HPMSVTypeID].
Inputs:
HPMSVTypePopulation, SourceTypeAgePopulation, SourceUseType
Outputs:
FractionWithinHPMSVType
Step: HPMSTravelFraction = sum(relativeMAR * FractionWithinHPMSVType).
Inputs:
FractionWithinHPMSVType, SourceTypeAge, SourceUseType
Outputs:
HPMSTravelFraction
Step: TravelFraction = (FractionWithinHPMSVType * relativeMAR) / HPMSTravelFraction.
Inputs:
FractionWithinHPMSVType, HPMSTravelFraction, SourceTypeAge, SourceUseType
Outputs:
TravelFraction
Step: totalTravelFraction(yearID,sourceTypeID) = Sum(TravelFraction).
Conditions:
VMT provided by sourcetype not HPMSVType
Inputs:
TravelFraction
Outputs:
TravelFractionSourceTypeSum
Step: When VMT by source type has been provided, normalize TravelFraction by year and source type. normalized TravelFraction = TravelFraction / totalTravelFraction.
Conditions:
VMT provided by sourcetype not HPMSVType
Inputs:
TravelFractionSourceTypeSum
Outputs:
TravelFraction
Step: VMT = HPMSBaseYearVMT.
Inputs:
HPMSVTypeYear, RunSpecSourceType, SourceUseType
Outputs:
AnalysisYearVMT
Step: Grow VMT one year. VMT[y] = VMT[y-1] * VMTGrowthFactor[y].
Inputs:
AnalysisYearVMT for year y-1, HPMSVTypeYear for year y
Outputs:
AnalysisYearVMT2
Step: Copy AnalysisYearVMT2 data into AnalysisYearVMT.
Inputs:
AnalysisYearVMT2
Outputs:
AnalysisYearVMT
Step: VMT = VMT * roadTypeVMTFraction * TravelFraction.
Conditions:
VMT provided by HPMSVType
Inputs:
AnalysisYearVMT, RoadType, RoadTypeDistribution, SourceUseType, TravelFraction
Outputs:
AnnualVMTByAgeRoadway
Step: VMT = VMT * roadTypeVMTFraction * TravelFraction.
Conditions:
VMT provided by source type
Inputs:
RoadType, RoadTypeDistribution, SourceTypeYearVMT, TravelFraction
Outputs:
AnnualVMTByAgeRoadway
Step: Append monthVMTFraction to AnnualVMTByAgeRoadway.
Inputs:
AnnualVMTByAgeRoadway, MonthVMTFraction
Outputs:
AvarMonth
Step: Append dayVMTFraction to AvarMonth.
Inputs:
AvarMonth, DayVMTFraction
Outputs:
AvarMonthDay
Step: Hourly VMT = Annual VMT * monthVMTFraction * dayVMTFraction * hourVMTFraction / weeksPerMonth.
Conditions:
Annual VMT provided, either by HPMSVType or sourceTypeID
Inputs:
AvarMonthDay, HourDay, HourVMTFraction
Outputs:
VMTByAgeRoadwayHour
Step: Hourly VMT = Daily VMT * hourVMTFraction * roadTypeVMTFraction * TravelFraction * NumberOfRealDays.
Conditions:
Daily VMT provided by sourceTypeID
Inputs:
DayOfAnyWeek, HourDay, HourVMTFraction, RoadTypeDistribution, SourceTypeDayVMT, TravelFraction
Outputs:
VMTByAgeRoadwayHour
Step: Hourly VMT = Daily VMT * hourVMTFraction * roadTypeVMTFraction * TravelFraction * NumberOfRealDays.
Conditions:
Daily VMT provided by HPMSVType
Inputs:
DayOfAnyWeek, HourDay, HourVMTFraction, HPMSVTypeDay, RoadTypeDistribution, SourceUseType, TravelFraction
Outputs:
VMTByAgeRoadwayHour
Step: totalVMT = sum(VMT).
Inputs:
vmtByAgeRoadwayHour
Outputs:
vmtByMYRoadHourSummary
Step: Find VMT fraction by model year. vmtFraction = VMT/totalVMT.
Inputs:
vmtByAgeRoadwayHour, vmtByMYRoadHourSummary
Outputs:
vmtByMYRoadHourFraction
Step: Remove unwanted days from SourceTypeHour.
Inputs:
HourDay, RunSpecDay, SourceTypeHour
Outputs:
SourceTypeHour
Step: Append dayID and hourID to SourceTypeHour.
Inputs:
HourDay, SourceTypeHour
Outputs:
SourceTypeHour2
Step: averageSpeed = sum(avgBinSpeed * avgSpeedFraction).
Inputs:
AvgSpeedBin, AvgSpeedDistribution, HourDay, HourOfAnyDay, RoadType, RunSpecDay, RunSpecSourceType
Outputs:
AverageSpeed
Step: SHO = VMT/averageSpeed where averageSpeed > 0, 0 otherwise.
Inputs:
AverageSpeed, VMTByAgeRoadwayHour
Outputs:
SHOByAgeRoadwayHour
Step: Find total VMT by day on Rural Restricted Access roads (roadTypeID=2) for Combination Long Haul Trucks (sourceTypeID=62). Daily VMT = sum(hourly VMT). hotellingHours = 0.
Inputs:
VMTByAgeRoadwayHour
Outputs:
VMTByAgeRoadwayDay
Step: hotellingHours = Daily VMT * hotellingRate.
Inputs:
hotellingCalendarYear
Outputs:
VMTByAgeRoadwayDay
Step: idleHours = hotellingHours * hotellingDist.
Inputs:
SourceTypeHour2, VMTByAgeRoadwayDay
Outputs:
IdleHoursByAgeHour
Step: Find the number of starts for each sample vehicle. starts = count(trips) * noOfRealDays.
Conditions:
Ignore marker trips
Inputs:
DayOfAnyWeek, HourDay, SampleVehicleDay, SampleVehicleTrip
Outputs:
StartsPerSampleVehicle
Step: startsPerVehicle = starts / count(sample vehicles).
Inputs:
SampleVehicleDay, StartsPerSampleVehicle
Outputs:
StartsPerVehicle
Step: starts = population * startsPerVehicle.
Inputs:
SourceTypeAgePopulation, StartsPerVehicle
Outputs:
StartsByAgeHour
Step: SHP = (population*noOfRealDays) - SUM(sho).
Inputs:
DayOfAnyWeek, ShoByAgeRoadwayHour, SourceTypeAgePopulation
Outputs:
SHPByAgeHour
Step: Copy SHO for blended road types to corresponding ramp road types. No scaling is done here.
Outputs:
SHOByAgeRoadwayHour
Step: Append SHOAllocFactor to link information.
Inputs:
Link, ZoneRoadType
Outputs:
ZoneRoadTypeLinkTemp
Step: SHO = SHO * averageSpeed * SHOAllocFactor.
Conditions:
Rates
Inputs:
AverageSpeed, LinkAverageSpeed, RunSpecHourDay, SHOByAgeRoadwayHour, ZoneRoadTypeLinkTemp
Outputs:
SHO
Step: SHO = SHO * SHOAllocFactor.
Conditions:
Inventory
Inputs:
RunSpecHourDay, SHOByAgeRoadwayHour, ZoneRoadTypeLinkTemp
Outputs:
SHO
Step: starts = starts * startAllocFactor.
Conditions:
Inventory
Inputs:
RunSpecMonth, StartsByAgeHour
Outputs:
Starts
Step: extendedIdleHours = hotellingHours * opModeFraction[opModeID=200 extended idling].
Conditions:
HotellingHours contains user-supplied hotelling information
Inputs:
hotellingActivityDistribution, hotellingHours
Outputs:
extendedIdleHours
Step: extendedIdleHours = idleHours * SHOAllocFactor * opModeFraction[opModeID=200 extended idling].
Inputs:
hotellingActivityDistribution, HourDay, IdleHoursByAgeHour, runSpecHourDay, ZoneRoadType
Outputs:
extendedIdleHours
Step: SHP = SHP * SHPAllocFactor.
Inputs:
RunSpecHourDay, SHPByAgeHour, Zone
Outputs:
SHP
Step: sourceHours = SHP.
Inputs:
Link, SHP
Outputs:
SourceHours
Step: sourceHours = SHO.
Inputs:
SHO
Outputs:
SourceHours
Step: distance = SHO * averageSpeed.
Conditions:
Rates
Inputs:
LinkAverageSpeed
Outputs:
SHO
Step: Append link and SHO information.
Conditions:
Inventory
Inputs:
Link, SHO
Outputs:
SHOTemp
Step: Append AverageSpeed and HourDay information.
Conditions:
Inventory
Inputs:
AverageSpeed, HourDay
Outputs:
AverageSpeedTemp
Step: distance = SHO * averageSpeed.
Conditions:
Inventory
Inputs:
AverageSpeedTemp, SHOTemp
Outputs:
SHO2
Step: Remove all items from the SHO table.
Conditions:
Inventory
Outputs:
SHO
Step: Copy the SHO2 information, which now includes distance, to the SHO table.
Conditions:
Inventory
Inputs:
SHO2
Outputs:
SHO
distance
distance is a CHAINED CALCULATOR.
distance is expressed in these source code files:
- /calc/go/src/distance/distance.go
AgeCategory table
CREATE TABLE agecategory (
ageID smallint(6) NOT NULL DEFAULT '0',
ageGroupID smallint(6) NOT NULL DEFAULT '0',
ageCategoryName char(50) DEFAULT NULL,
PRIMARY KEY (ageID),
KEY ageGroupID (ageGroupID,ageID),
KEY ageID (ageID,ageGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The AgeCategory is used by these modules:
AgeGroup table
CREATE TABLE agegroup (
ageGroupID smallint(6) NOT NULL DEFAULT '0',
ageGroupName char(50) DEFAULT NULL,
PRIMARY KEY (ageGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
ATBaseEmissions table
CREATE TABLE atbaseemissions (
polProcessID int(11) NOT NULL DEFAULT '0',
monthGroupID smallint(6) NOT NULL DEFAULT '0',
atBaseEmissions float NOT NULL DEFAULT '0',
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,monthGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ATBaseEmissions is used by these modules:
ATRatio table
CREATE TABLE atratio (
fuelTypeID smallint(6) NOT NULL,
fuelFormulationID smallint(6) NOT NULL,
polProcessID int(11) NOT NULL,
minModelYearID smallint(6) NOT NULL,
maxModelYearID smallint(6) NOT NULL,
ageID smallint(6) NOT NULL,
monthGroupID smallint(6) NOT NULL,
atRatio double DEFAULT NULL,
PRIMARY KEY (fuelTypeID,fuelFormulationID,polProcessID,minModelYearID,maxModelYearID,ageID,monthGroupID),
KEY atratio_key1 (fuelFormulationID,polProcessID,minModelYearID),
KEY atratio_key2 (polProcessID,fuelTypeID,monthGroupID,minModelYearID,ageID,maxModelYearID,fuelFormulationID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ATRatio is used by these modules:
ATRatioGas2 table
CREATE TABLE atratiogas2 (
polProcessID int(11) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
ATRatio float DEFAULT NULL,
ATRatioCV float DEFAULT NULL,
PRIMARY KEY (polProcessID,sourceTypeID,fuelSubtypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ATRatioGas2 is used by these modules:
ATRatioNonGas table
CREATE TABLE atrationongas (
polProcessID int(11) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
ATRatio double DEFAULT NULL,
ATRatioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,sourceTypeID,fuelSubtypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ATRatioNonGas is used by these modules:
AverageTankGasoline table
CREATE TABLE averagetankgasoline (
zoneID int(11) NOT NULL DEFAULT '0',
fuelYearID int(11) NOT NULL DEFAULT '0',
monthGroupID smallint(6) NOT NULL DEFAULT '0',
ETOHVolume float DEFAULT NULL,
RVP float DEFAULT NULL,
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (zoneID,fuelTypeID,fuelYearID,monthGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The AverageTankGasoline is used by these modules:
AverageTankTemperature table
CREATE TABLE averagetanktemperature (
tankTemperatureGroupID smallint(6) NOT NULL DEFAULT '0',
zoneID int(11) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
averageTankTemperature float DEFAULT NULL,
averageTankTemperatureCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (tankTemperatureGroupID,zoneID,monthID,hourDayID,opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The AverageTankTemperature is used by these modules:
avft table
CREATE TABLE avft (
sourceTypeID smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
fuelEngFraction double NOT NULL,
PRIMARY KEY (sourceTypeID,modelYearID,fuelTypeID,engTechID),
KEY sourceTypeID (sourceTypeID),
KEY modelYearID (modelYearID),
KEY fuelTypeID (fuelTypeID),
KEY engTechID (engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
AvgSpeedBin table
CREATE TABLE avgspeedbin (
avgSpeedBinID smallint(6) NOT NULL DEFAULT '0',
avgBinSpeed float DEFAULT NULL,
avgSpeedBinDesc char(50) DEFAULT NULL,
opModeIDTirewear smallint(6) DEFAULT NULL,
opModeIDRunning smallint(6) DEFAULT NULL,
PRIMARY KEY (avgSpeedBinID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The AvgSpeedBin is used by these modules:
AvgSpeedDistribution table
CREATE TABLE avgspeeddistribution (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
avgSpeedBinID smallint(6) NOT NULL DEFAULT '0',
avgSpeedFraction float DEFAULT NULL,
PRIMARY KEY (avgSpeedBinID,hourDayID,roadTypeID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY roadTypeID (roadTypeID),
KEY hourDayID (hourDayID),
KEY avgSpeedBinID (avgSpeedBinID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The AvgSpeedDistribution is used by these modules:
BaseFuel table
CREATE TABLE basefuel (
calculationEngine varchar(100) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
modelYearGroupID int(11) NOT NULL DEFAULT '0',
fuelFormulationID smallint(6) NOT NULL,
description varchar(255) NOT NULL DEFAULT '',
dataSourceID smallint(6) NOT NULL,
PRIMARY KEY (calculationEngine,fuelTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The BaseFuel is used by these modules:
ColdSoakInitialHourFraction table
CREATE TABLE coldsoakinitialhourfraction (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
zoneID int(11) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
initialHourDayID smallint(6) NOT NULL DEFAULT '0',
coldSoakInitialHourFraction float NOT NULL DEFAULT '0',
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (sourceTypeID,zoneID,monthID,hourDayID,initialHourDayID),
KEY isUserInput (isUserInput)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ColdSoakInitialHourFraction is used by these modules:
ColdSoakTankTemperature table
CREATE TABLE coldsoaktanktemperature (
zoneID int(11) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
coldSoakTankTemperature float NOT NULL DEFAULT '0',
PRIMARY KEY (zoneID,monthID,hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ColdSoakTankTemperature is used by these modules:
ComplexModelParameterName table
CREATE TABLE complexmodelparametername (
cmpID smallint(6) NOT NULL DEFAULT '0',
cmpName char(25) NOT NULL,
cmpExpression varchar(500) NOT NULL,
PRIMARY KEY (cmpID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ComplexModelParameterName is used by these modules:
ComplexModelParameters table
CREATE TABLE complexmodelparameters (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelModelID smallint(6) NOT NULL DEFAULT '0',
cmpID smallint(6) NOT NULL DEFAULT '0',
coeff1 float DEFAULT NULL,
coeff2 float DEFAULT NULL,
coeff3 float DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelModelID,cmpID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ComplexModelParameters is used by these modules:
County table
CREATE TABLE county (
countyID int(11) NOT NULL DEFAULT '0',
stateID smallint(6) NOT NULL DEFAULT '0',
countyName char(50) DEFAULT NULL,
altitude char(1) DEFAULT NULL,
GPAFract float DEFAULT NULL,
barometricPressure float DEFAULT NULL,
barometricPressureCV float DEFAULT NULL,
PRIMARY KEY (countyID),
KEY countyID (countyID,stateID),
KEY stateID (stateID,countyID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The County is used by these modules:
CountyYear table
CREATE TABLE countyyear (
countyID int(11) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
refuelingVaporProgramAdjust float NOT NULL DEFAULT '0',
refuelingSpillProgramAdjust float NOT NULL DEFAULT '0',
PRIMARY KEY (countyID,yearID),
KEY countyID (countyID),
KEY yearID (yearID),
KEY yearID_2 (yearID,countyID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The CountyYear is used by these modules:
CrankcaseEmissionRatio table
CREATE TABLE crankcaseemissionratio (
polProcessID int(11) NOT NULL,
minModelYearID smallint(6) NOT NULL,
maxModelYearID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
crankcaseRatio float NOT NULL,
crankcaseRatioCV float DEFAULT NULL,
PRIMARY KEY (polProcessID,minModelYearID,maxModelYearID,sourceTypeID,fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The CrankcaseEmissionRatio is used by these modules:
criteriaRatio table
CREATE TABLE criteriaratio (
fuelTypeID smallint(6) NOT NULL,
fuelFormulationID smallint(6) NOT NULL,
polProcessID int(11) NOT NULL,
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
ageID smallint(6) NOT NULL,
ratio double DEFAULT NULL,
ratioGPA double DEFAULT NULL,
ratioNoSulfur double DEFAULT NULL,
PRIMARY KEY (fuelTypeID,fuelFormulationID,polProcessID,pollutantID,processID,sourceTypeID,modelYearID,ageID),
KEY crFuelFormulation (polProcessID,fuelFormulationID),
KEY crCommon (polProcessID,modelYearID,ageID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The criteriaRatio is used by these modules:
CumTVVCoeffs table
CREATE TABLE cumtvvcoeffs (
regClassID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
ageGroupID smallint(6) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
tvvTermA float DEFAULT NULL,
tvvTermB float DEFAULT NULL,
tvvTermC float DEFAULT NULL,
tvvTermACV float DEFAULT NULL,
tvvTermBCV float DEFAULT NULL,
tvvTermCCV float DEFAULT NULL,
tvvTermAIM float DEFAULT NULL,
tvvTermBIM float DEFAULT NULL,
tvvTermCIM float DEFAULT NULL,
tvvTermAIMCV float DEFAULT NULL,
tvvTermBIMCV float DEFAULT NULL,
tvvTermCIMCV float DEFAULT NULL,
backPurgeFactor double DEFAULT NULL,
averageCanisterCapacity double DEFAULT NULL,
tvvEquation varchar(4096) NOT NULL DEFAULT '',
leakEquation varchar(4096) NOT NULL DEFAULT '',
leakFraction double DEFAULT NULL,
tankSize double DEFAULT NULL,
tankFillFraction double DEFAULT NULL,
leakFractionIM double DEFAULT NULL,
PRIMARY KEY (regClassID,modelYearGroupID,ageGroupID,polProcessID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The CumTVVCoeffs is used by these modules:
DataSource table
CREATE TABLE datasource (
DataSourceId smallint(6) NOT NULL DEFAULT '0',
Author char(25) DEFAULT NULL,
Date date DEFAULT NULL,
Sponsor char(30) DEFAULT NULL,
DocumentID char(150) DEFAULT NULL,
QualityLevel char(1) DEFAULT NULL,
PRIMARY KEY (DataSourceId)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
DayOfAnyWeek table
CREATE TABLE dayofanyweek (
dayID smallint(6) NOT NULL DEFAULT '0',
dayName char(10) DEFAULT NULL,
noOfRealDays float NOT NULL DEFAULT '1',
PRIMARY KEY (dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The DayOfAnyWeek is used by these modules:
DayVMTFraction table
CREATE TABLE dayvmtfraction (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
dayID smallint(6) NOT NULL DEFAULT '0',
dayVMTFraction float DEFAULT NULL,
PRIMARY KEY (dayID,monthID,roadTypeID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY monthID (monthID),
KEY roadTypeID (roadTypeID),
KEY dayID (dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The DayVMTFraction is used by these modules:
dioxinemissionrate table
CREATE TABLE dioxinemissionrate (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
units char(30) DEFAULT NULL,
meanBaseRate double DEFAULT NULL,
meanBaseRateCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelTypeID,modelYearGroupID),
UNIQUE KEY XPKDioxinEmissionRate (polProcessID,fuelTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The dioxinemissionrate is used by these modules:
DriveSchedule table
CREATE TABLE driveschedule (
driveScheduleID smallint(6) NOT NULL DEFAULT '0',
averageSpeed float NOT NULL DEFAULT '0',
driveScheduleName char(50) DEFAULT NULL,
PRIMARY KEY (driveScheduleID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The DriveSchedule is used by these modules:
DriveScheduleAssoc table
CREATE TABLE drivescheduleassoc (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
driveScheduleID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (driveScheduleID,roadTypeID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY roadTypeID (roadTypeID),
KEY driveScheduleID (driveScheduleID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The DriveScheduleAssoc is used by these modules:
DriveScheduleSecond table
CREATE TABLE driveschedulesecond (
driveScheduleID smallint(6) NOT NULL DEFAULT '0',
second smallint(6) NOT NULL DEFAULT '0',
speed float DEFAULT NULL,
PRIMARY KEY (driveScheduleID,second),
KEY driveScheduleID (driveScheduleID),
KEY second (second)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The DriveScheduleSecond is used by these modules:
driveScheduleSecondLink table
CREATE TABLE driveschedulesecondlink (
linkID int(11) NOT NULL,
secondID smallint(6) NOT NULL,
speed float DEFAULT NULL,
grade float NOT NULL DEFAULT '0',
PRIMARY KEY (linkID,secondID),
KEY secondID (secondID,linkID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The driveScheduleSecondLink is used by these modules:
e10FuelProperties table
CREATE TABLE e10fuelproperties (
fuelRegionID int(11) NOT NULL,
fuelYearID int(11) NOT NULL,
monthGroupID smallint(6) NOT NULL,
RVP double DEFAULT NULL,
sulfurLevel double DEFAULT NULL,
ETOHVolume double DEFAULT NULL,
MTBEVolume double DEFAULT NULL,
ETBEVolume double DEFAULT NULL,
TAMEVolume double DEFAULT NULL,
aromaticContent double DEFAULT NULL,
olefinContent double DEFAULT NULL,
benzeneContent double DEFAULT NULL,
e200 double DEFAULT NULL,
e300 double DEFAULT NULL,
BioDieselEsterVolume double DEFAULT NULL,
CetaneIndex double DEFAULT NULL,
PAHContent double DEFAULT NULL,
T50 double DEFAULT NULL,
T90 double DEFAULT NULL,
PRIMARY KEY (fuelRegionID,fuelYearID,monthGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
EmissionProcess table
CREATE TABLE emissionprocess (
processID smallint(6) NOT NULL DEFAULT '0',
processName char(50) DEFAULT NULL,
SCCProcID char(1) DEFAULT NULL,
occursOnRealRoads char(1) NOT NULL DEFAULT 'Y',
shortName varchar(50) DEFAULT NULL,
processDisplayGroupID smallint(6) unsigned DEFAULT NULL,
isAffectedByOnroad tinyint(1) DEFAULT '1',
isAffectedByNonroad tinyint(1) DEFAULT '0',
PRIMARY KEY (processID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The EmissionProcess is used by these modules:
EmissionRate table
CREATE TABLE emissionrate (
sourceBinID bigint(20) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
meanBaseRate float DEFAULT NULL,
meanBaseRateCV float DEFAULT NULL,
meanBaseRateIM float DEFAULT NULL,
meanBaseRateIMCV float DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (opModeID,polProcessID,sourceBinID),
KEY sourceBinID (sourceBinID),
KEY polProcessID (polProcessID),
KEY opModeID (opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The EmissionRate is used by these modules:
EmissionRateAdjustment table
CREATE TABLE emissionrateadjustment (
polProcessID int(11) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
regClassID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
beginModelYearID smallint(6) NOT NULL,
endModelYearID smallint(6) NOT NULL,
emissionRateAdjustment double DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,sourceTypeID,fuelTypeID,regClassID,beginModelYearID,endModelYearID),
KEY polProcessID (polProcessID,beginModelYearID,endModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The EmissionRateAdjustment is used by these modules:
EmissionRateByAge table
CREATE TABLE emissionratebyage (
sourceBinID bigint(20) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
ageGroupID smallint(6) NOT NULL DEFAULT '0',
meanBaseRate float DEFAULT NULL,
meanBaseRateCV float DEFAULT NULL,
meanBaseRateIM float DEFAULT NULL,
meanBaseRateIMCV float DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (ageGroupID,opModeID,polProcessID,sourceBinID),
UNIQUE KEY XPKEmissionRateByAge (sourceBinID,polProcessID,opModeID,ageGroupID),
KEY polProcessID (polProcessID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The EmissionRateByAge is used by these modules:
EngineSize table
CREATE TABLE enginesize (
engSizeID int(11) NOT NULL,
engSizeName char(50) DEFAULT NULL,
PRIMARY KEY (engSizeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
enginetech table
CREATE TABLE enginetech (
engTechID smallint(6) NOT NULL DEFAULT '0',
tierID smallint(6) DEFAULT '99',
strokes smallint(6) DEFAULT '99',
engTechName char(50) DEFAULT NULL,
engTechDesc char(80) DEFAULT NULL,
PRIMARY KEY (engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
ETOHBin table
CREATE TABLE etohbin (
etohThreshID smallint(6) NOT NULL DEFAULT '0',
etohThreshLow float DEFAULT NULL,
etohThreshHigh float DEFAULT NULL,
etohNominalValue float DEFAULT NULL,
PRIMARY KEY (etohThreshID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ETOHBin is used by these modules:
evapRVPTemperatureAdjustment table
CREATE TABLE evaprvptemperatureadjustment (
processID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
RVP double NOT NULL,
adjustTerm3 double NOT NULL DEFAULT '0',
adjustTerm2 double NOT NULL DEFAULT '0',
adjustTerm1 double NOT NULL DEFAULT '0',
adjustConstant double NOT NULL DEFAULT '0',
PRIMARY KEY (processID,fuelTypeID,RVP),
KEY RVP (RVP,processID,fuelTypeID),
KEY RVP_2 (RVP,fuelTypeID,processID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The evapRVPTemperatureAdjustment is used by these modules:
evapTemperatureAdjustment table
CREATE TABLE evaptemperatureadjustment (
processID smallint(6) NOT NULL,
tempAdjustTerm3 double NOT NULL DEFAULT '0',
tempAdjustTerm2 double NOT NULL DEFAULT '0',
tempAdjustTerm1 double NOT NULL DEFAULT '0',
tempAdjustConstant double NOT NULL DEFAULT '0',
PRIMARY KEY (processID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The evapTemperatureAdjustment is used by these modules:
ExtendedIdleHours table
CREATE TABLE extendedidlehours (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
zoneID int(11) NOT NULL DEFAULT '0',
extendedIdleHours float DEFAULT NULL,
extendedIdleHoursCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (ageID,hourDayID,monthID,sourceTypeID,yearID,zoneID),
KEY sourceTypeID (sourceTypeID),
KEY hourDayID (hourDayID),
KEY monthID (monthID),
KEY yearID (yearID),
KEY ageID (ageID),
KEY zoneID (zoneID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ExtendedIdleHours is used by these modules:
FuelEngTechAssoc table
CREATE TABLE fuelengtechassoc (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
engTechID smallint(6) NOT NULL DEFAULT '0',
category char(50) NOT NULL DEFAULT '',
categoryDisplayOrder smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (engTechID,fuelTypeID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
FuelFormulation table
CREATE TABLE fuelformulation (
fuelFormulationID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
RVP float DEFAULT NULL,
sulfurLevel float NOT NULL DEFAULT '30',
ETOHVolume float DEFAULT NULL,
MTBEVolume float DEFAULT NULL,
ETBEVolume float DEFAULT NULL,
TAMEVolume float DEFAULT NULL,
aromaticContent float DEFAULT NULL,
olefinContent float DEFAULT NULL,
benzeneContent float DEFAULT NULL,
e200 float DEFAULT NULL,
e300 float DEFAULT NULL,
volToWtPercentOxy float DEFAULT NULL,
BioDieselEsterVolume float DEFAULT NULL,
CetaneIndex float DEFAULT NULL,
PAHContent float DEFAULT NULL,
T50 float DEFAULT NULL,
T90 float DEFAULT NULL,
PRIMARY KEY (fuelFormulationID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelFormulation is used by these modules:
FuelModelName table
CREATE TABLE fuelmodelname (
fuelModelID smallint(6) NOT NULL DEFAULT '0',
fuelModelName varchar(50) NOT NULL DEFAULT '',
fuelModelAbbreviation varchar(10) NOT NULL DEFAULT '',
calculationEngines varchar(200) NOT NULL DEFAULT '',
PRIMARY KEY (fuelModelID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelModelName is used by these modules:
FuelModelWtFactor table
CREATE TABLE fuelmodelwtfactor (
fuelModelID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
fuelModelWtFactor float DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (fuelModelID,modelYearGroupID,ageID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelModelWtFactor is used by these modules:
FuelModelYearGroup table
CREATE TABLE fuelmodelyeargroup (
fuelMYGroupID int(11) NOT NULL DEFAULT '0',
fuelMYGroupName char(100) DEFAULT NULL,
fuelMYGroupFunction char(200) DEFAULT NULL,
maxSulfurLevel float DEFAULT NULL,
maxSulfurLevelCV float DEFAULT NULL,
maxSulfurLevelGPA float DEFAULT NULL,
maxSulfurLevelGPACV float DEFAULT NULL,
PRIMARY KEY (fuelMYGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
FuelParameterName table
CREATE TABLE fuelparametername (
fuelParameterID smallint(6) NOT NULL DEFAULT '0',
fuelParameterName varchar(25) NOT NULL DEFAULT '',
fuelParameterUnits varchar(20) NOT NULL DEFAULT '',
fuelParameterExpression varchar(500) NOT NULL DEFAULT '',
PRIMARY KEY (fuelParameterID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelParameterName is used by these modules:
FuelSubtype table
CREATE TABLE fuelsubtype (
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeDesc char(50) DEFAULT NULL,
fuelSubtypePetroleumFraction float DEFAULT NULL,
fuelSubtypePetroleumFractionCV float DEFAULT NULL,
fuelSubtypeFossilFraction float DEFAULT NULL,
fuelSubtypeFossilFractionCV float DEFAULT NULL,
carbonContent float DEFAULT NULL,
oxidationFraction float DEFAULT NULL,
carbonContentCV float DEFAULT NULL,
oxidationFractionCV float DEFAULT NULL,
energyContent float DEFAULT NULL,
PRIMARY KEY (fuelSubtypeID),
KEY fuelTypeID (fuelTypeID,fuelSubtypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelSubtype is used by these modules:
FuelSupply table
CREATE TABLE fuelsupply (
fuelRegionID int(11) NOT NULL DEFAULT '0',
fuelYearID smallint(6) NOT NULL DEFAULT '0',
monthGroupID smallint(6) NOT NULL DEFAULT '0',
fuelFormulationID smallint(6) NOT NULL DEFAULT '0',
marketShare float DEFAULT NULL,
marketShareCV float DEFAULT NULL,
PRIMARY KEY (fuelRegionID,fuelFormulationID,monthGroupID,fuelYearID),
KEY fuelRegionID (fuelRegionID),
KEY yearID (fuelYearID),
KEY monthGroupID (monthGroupID),
KEY fuelSubtypeID (fuelFormulationID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelSupply is used by these modules:
FuelSupplyYear table
CREATE TABLE fuelsupplyyear (
fuelYearID int(11) NOT NULL DEFAULT '0',
PRIMARY KEY (fuelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
FuelType table
CREATE TABLE fueltype (
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
defaultFormulationID smallint(6) NOT NULL DEFAULT '0',
fuelTypeDesc char(50) DEFAULT NULL,
humidityCorrectionCoeff float DEFAULT NULL,
humidityCorrectionCoeffCV float DEFAULT NULL,
fuelDensity float DEFAULT NULL,
subjectToEvapCalculations char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (fuelTypeID),
KEY subjectToEvapCalculations (subjectToEvapCalculations,fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FuelType is used by these modules:
fuelUsageFraction table
CREATE TABLE fuelusagefraction (
countyID int(11) NOT NULL,
fuelYearID int(11) NOT NULL,
modelYearGroupID int(11) NOT NULL,
sourceBinFuelTypeID smallint(6) NOT NULL,
fuelSupplyFuelTypeID smallint(6) NOT NULL,
usageFraction double DEFAULT NULL,
PRIMARY KEY (countyID,fuelYearID,modelYearGroupID,sourceBinFuelTypeID,fuelSupplyFuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The fuelUsageFraction is used by these modules:
fuelWizardFactors table
CREATE TABLE fuelwizardfactors (
adjustedParameter varchar(4) NOT NULL,
minLevel double NOT NULL,
maxLevel double NOT NULL,
functionType varchar(4) NOT NULL,
monthGroupID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
RVP_factor double DEFAULT NULL,
sulf_factor double DEFAULT NULL,
ETOH_factor double DEFAULT NULL,
arom_factor double DEFAULT NULL,
olef_factor double DEFAULT NULL,
benz_factor double DEFAULT NULL,
e200_factor double DEFAULT NULL,
e300_factor double DEFAULT NULL,
T50_factor double DEFAULT NULL,
T90_factor double DEFAULT NULL,
units varchar(6) DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (fuelTypeID,monthGroupID,adjustedParameter,minLevel,maxLevel,functionType)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
FullACAdjustment table
CREATE TABLE fullacadjustment (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
fullACAdjustment float DEFAULT NULL,
fullACAdjustmentCV float DEFAULT NULL,
PRIMARY KEY (opModeID,polProcessID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY polProcessID (polProcessID),
KEY opModeID (opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The FullACAdjustment is used by these modules:
generalFuelRatio table
CREATE TABLE generalfuelratio (
fuelTypeID smallint(6) NOT NULL,
fuelFormulationID smallint(6) NOT NULL,
polProcessID int(11) NOT NULL,
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
minModelYearID smallint(6) NOT NULL DEFAULT '1960',
maxModelYearID smallint(6) NOT NULL DEFAULT '2050',
minAgeID smallint(6) NOT NULL DEFAULT '0',
maxAgeID smallint(6) NOT NULL DEFAULT '30',
sourceTypeID smallint(6) unsigned NOT NULL,
fuelEffectRatio double NOT NULL DEFAULT '0',
fuelEffectRatioGPA double NOT NULL DEFAULT '0',
PRIMARY KEY (fuelTypeID,fuelFormulationID,polProcessID,pollutantID,processID,minModelYearID,maxModelYearID,minAgeID,maxAgeID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The generalFuelRatio is used by these modules:
generalFuelRatioExpression table
CREATE TABLE generalfuelratioexpression (
fuelTypeID smallint(6) NOT NULL,
polProcessID int(11) NOT NULL,
minModelYearID int(11) NOT NULL DEFAULT '1960',
maxModelYearID int(11) NOT NULL DEFAULT '2050',
minAgeID int(11) NOT NULL DEFAULT '0',
maxAgeID int(11) NOT NULL DEFAULT '30',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
fuelEffectRatioExpression varchar(32000) NOT NULL DEFAULT '',
fuelEffectRatioGPAExpression varchar(32000) NOT NULL DEFAULT '',
PRIMARY KEY (fuelTypeID,polProcessID,minModelYearID,maxModelYearID,minAgeID,maxAgeID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The generalFuelRatioExpression is used by these modules:
GREETManfAndDisposal table
CREATE TABLE greetmanfanddisposal (
GREETVehicleType smallint(6) NOT NULL DEFAULT '0',
modelYearID smallint(6) NOT NULL DEFAULT '0',
pollutantID smallint(6) NOT NULL DEFAULT '0',
EmissionStage char(4) NOT NULL DEFAULT '',
emissionPerVehicle float DEFAULT NULL,
PRIMARY KEY (EmissionStage,GREETVehicleType,modelYearID,pollutantID),
UNIQUE KEY XPKGREETManfAndDisposal (GREETVehicleType,modelYearID,pollutantID,EmissionStage),
KEY GREETVehicleType (GREETVehicleType),
KEY modelYearID (modelYearID),
KEY pollutantID (pollutantID),
KEY EmissionStage (EmissionStage)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
GREETWellToPump table
CREATE TABLE greetwelltopump (
yearID smallint(6) NOT NULL DEFAULT '0',
pollutantID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
emissionRate float DEFAULT NULL,
emissionRateUncertainty float DEFAULT NULL,
PRIMARY KEY (fuelSubtypeID,pollutantID,yearID),
KEY yearID (yearID),
KEY pollutantID (pollutantID),
KEY fuelSubtypeID (fuelSubtypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The GREETWellToPump is used by these modules:
Grid table
CREATE TABLE grid (
gridID int(11) NOT NULL DEFAULT '0',
PRIMARY KEY (gridID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
GridZoneAssoc table
CREATE TABLE gridzoneassoc (
zoneID int(11) NOT NULL DEFAULT '0',
gridID int(11) NOT NULL DEFAULT '0',
gridAllocFactor float DEFAULT NULL,
PRIMARY KEY (gridID,zoneID),
KEY zoneID (zoneID),
KEY gridID (gridID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
HCPermeationCoeff table
CREATE TABLE hcpermeationcoeff (
polProcessID int(11) NOT NULL DEFAULT '0',
etohThreshID smallint(6) NOT NULL DEFAULT '0',
fuelMYGroupID int(11) NOT NULL DEFAULT '0',
fuelAdjustment float DEFAULT NULL,
fuelAdjustmentGPA float DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,etohThreshID,fuelMYGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The HCPermeationCoeff is used by these modules:
HCSpeciation table
CREATE TABLE hcspeciation (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
regClassID smallint(6) NOT NULL DEFAULT '0',
beginModelYearID smallint(6) NOT NULL DEFAULT '0',
endModelYearID smallint(6) NOT NULL DEFAULT '0',
speciationConstant double NOT NULL DEFAULT '0',
oxySpeciation double NOT NULL DEFAULT '0',
dataSourceID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (polProcessID,fuelSubtypeID,regClassID,beginModelYearID,endModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The HCSpeciation is used by these modules:
hotellingActivityDistribution table
CREATE TABLE hotellingactivitydistribution (
beginModelYearID smallint(6) NOT NULL,
endModelYearID smallint(6) NOT NULL,
opModeID smallint(6) NOT NULL,
opModeFraction float NOT NULL,
PRIMARY KEY (beginModelYearID,endModelYearID,opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The hotellingActivityDistribution is used by these modules:
hotellingCalendarYear table
CREATE TABLE hotellingcalendaryear (
yearID smallint(6) NOT NULL,
hotellingRate double NOT NULL,
PRIMARY KEY (yearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The hotellingCalendarYear is used by these modules:
hotellingHourFraction table
CREATE TABLE hotellinghourfraction (
zoneID int(11) NOT NULL,
dayID smallint(6) NOT NULL,
hourID smallint(6) NOT NULL,
allocationFraction double NOT NULL,
PRIMARY KEY (zoneID,dayID,hourID),
KEY hourID (hourID,dayID,zoneID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
hotellingHours table
CREATE TABLE hotellinghours (
sourceTypeID smallint(6) NOT NULL,
hourDayID smallint(6) NOT NULL,
monthID smallint(6) NOT NULL,
yearID smallint(6) NOT NULL,
ageID smallint(6) NOT NULL,
zoneID int(11) NOT NULL,
hotellingHours double DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (sourceTypeID,hourDayID,monthID,yearID,ageID,zoneID),
KEY sourceTypeID (sourceTypeID),
KEY hourDayID (hourDayID),
KEY monthID (monthID),
KEY yearID (yearID),
KEY ageID (ageID),
KEY zoneID (zoneID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The hotellingHours is used by these modules:
hotellingHoursPerDay table
CREATE TABLE hotellinghoursperday (
zoneID int(11) NOT NULL,
dayID smallint(6) NOT NULL,
ageID smallint(6) NOT NULL,
hotellingHoursPerDay double NOT NULL,
PRIMARY KEY (zoneID,dayID,ageID),
KEY ageID (ageID,zoneID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
hotellingMonthAdjust table
CREATE TABLE hotellingmonthadjust (
monthID smallint(6) NOT NULL,
monthAdjustment double NOT NULL,
PRIMARY KEY (monthID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
HourDay table
CREATE TABLE hourday (
hourDayID smallint(6) NOT NULL DEFAULT '0',
dayID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (hourDayID),
KEY dayID (dayID),
KEY hourID (hourID),
KEY dayID_2 (dayID,hourID,hourDayID),
KEY hourID_2 (hourID,dayID,hourDayID),
KEY hourDayID (hourDayID,dayID,hourID),
KEY hourDayID_2 (hourDayID,hourID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The HourDay is used by these modules:
HourOfAnyDay table
CREATE TABLE hourofanyday (
hourID smallint(6) NOT NULL DEFAULT '0',
hourname char(50) DEFAULT NULL,
PRIMARY KEY (hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The HourOfAnyDay is used by these modules:
HourVMTFraction table
CREATE TABLE hourvmtfraction (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
dayID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
hourVMTFraction float DEFAULT NULL,
PRIMARY KEY (dayID,hourID,roadTypeID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY roadTypeID (roadTypeID),
KEY dayID (dayID),
KEY hourID (hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The HourVMTFraction is used by these modules:
HPMSVtype table
CREATE TABLE hpmsvtype (
HPMSVtypeID smallint(6) NOT NULL DEFAULT '0',
HPMSVtypeName char(50) DEFAULT NULL,
PRIMARY KEY (HPMSVtypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
HPMSVtypeDay table
CREATE TABLE hpmsvtypeday (
yearID smallint(6) NOT NULL,
monthID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
HPMSVtypeID smallint(6) NOT NULL,
VMT double NOT NULL,
PRIMARY KEY (yearID,monthID,dayID,HPMSVtypeID),
KEY HPMSVtypeID (HPMSVtypeID,yearID,monthID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The HPMSVtypeDay is used by these modules:
HPMSVtypeYear table
CREATE TABLE hpmsvtypeyear (
HPMSVtypeID smallint(6) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
VMTGrowthFactor double DEFAULT NULL,
HPMSBaseYearVMT double DEFAULT NULL,
PRIMARY KEY (HPMSVtypeID,yearID),
KEY HPMSVtypeID (HPMSVtypeID),
KEY yearID (yearID),
KEY yearID_2 (yearID,HPMSVtypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The HPMSVtypeYear is used by these modules:
IMCoverage table
CREATE TABLE imcoverage (
polProcessID int(11) NOT NULL DEFAULT '0',
stateID smallint(6) NOT NULL DEFAULT '0',
countyID int(11) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
IMProgramID smallint(6) NOT NULL DEFAULT '0',
begModelYearID smallint(6) NOT NULL DEFAULT '0',
endModelYearID smallint(6) NOT NULL DEFAULT '0',
inspectFreq smallint(6) DEFAULT NULL,
testStandardsID smallint(6) NOT NULL DEFAULT '0',
useIMyn char(1) NOT NULL DEFAULT 'Y',
complianceFactor float DEFAULT NULL,
PRIMARY KEY (polProcessID,stateID,countyID,yearID,sourceTypeID,fuelTypeID,IMProgramID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The IMCoverage is used by these modules:
IMFactor table
CREATE TABLE imfactor (
polProcessID int(11) NOT NULL,
inspectFreq smallint(6) NOT NULL,
testStandardsID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
IMModelYearGroupID int(8) NOT NULL,
ageGroupID smallint(6) NOT NULL,
IMFactor float DEFAULT NULL,
PRIMARY KEY (polProcessID,inspectFreq,testStandardsID,sourceTypeID,fuelTypeID,IMModelYearGroupID,ageGroupID),
UNIQUE KEY XPKIMFactor (polProcessID,inspectFreq,testStandardsID,sourceTypeID,fuelTypeID,IMModelYearGroupID,ageGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The IMFactor is used by these modules:
imInspectFreq table
CREATE TABLE iminspectfreq (
inspectFreq smallint(6) NOT NULL,
inspectFreqDesc char(50) DEFAULT NULL,
PRIMARY KEY (inspectFreq),
UNIQUE KEY XPKIMInspectFreq (inspectFreq)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
IMModelYearGroup table
CREATE TABLE immodelyeargroup (
IMModelYearGroupID int(8) NOT NULL,
IMModelYearGroupDesc char(40) NOT NULL,
PRIMARY KEY (IMModelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
IMTestStandards table
CREATE TABLE imteststandards (
testStandardsID smallint(6) NOT NULL,
testStandardsDesc char(50) NOT NULL,
shortName varchar(50) DEFAULT NULL,
PRIMARY KEY (testStandardsID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
integratedSpeciesSet table
CREATE TABLE integratedspeciesset (
mechanismID smallint(6) NOT NULL,
integratedSpeciesSetID smallint(6) NOT NULL,
pollutantID smallint(6) NOT NULL,
useISSyn varchar(2) DEFAULT NULL,
PRIMARY KEY (mechanismID,integratedSpeciesSetID,pollutantID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The integratedSpeciesSet is used by these modules:
integratedSpeciesSetName table
CREATE TABLE integratedspeciessetname (
integratedSpeciesSetID smallint(6) NOT NULL,
integratedSpeciesSetName varchar(40) DEFAULT NULL,
PRIMARY KEY (integratedSpeciesSetID),
KEY integratedSpeciesSetName (integratedSpeciesSetName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
Link table
CREATE TABLE link (
linkID int(11) NOT NULL DEFAULT '0',
countyID int(11) NOT NULL DEFAULT '0',
zoneID int(11) DEFAULT NULL,
roadTypeID smallint(6) NOT NULL DEFAULT '0',
linkLength float DEFAULT NULL,
linkVolume float DEFAULT NULL,
linkAvgSpeed float DEFAULT NULL,
linkDescription varchar(50) DEFAULT NULL,
linkAvgGrade float DEFAULT NULL,
PRIMARY KEY (linkID),
KEY countyID (countyID),
KEY zoneID (zoneID),
KEY roadTypeID (roadTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The Link is used by these modules:
LinkAverageSpeed table
CREATE TABLE linkaveragespeed (
linkID int(11) NOT NULL DEFAULT '0',
averageSpeed float DEFAULT NULL,
PRIMARY KEY (linkID),
KEY linkID (linkID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The LinkAverageSpeed is used by these modules:
LinkHourVMTFraction table
CREATE TABLE linkhourvmtfraction (
linkID int(11) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
dayID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
VMTFraction float DEFAULT NULL,
PRIMARY KEY (dayID,hourID,linkID,monthID,sourceTypeID),
KEY linkID (linkID),
KEY monthID (monthID),
KEY sourceTypeID (sourceTypeID),
KEY dayID (dayID),
KEY hourID (hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
linkSourceTypeHour table
CREATE TABLE linksourcetypehour (
linkID int(11) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
sourceTypeHourFraction float DEFAULT NULL,
PRIMARY KEY (linkID,sourceTypeID),
KEY sourceTypeID (sourceTypeID,linkID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The linkSourceTypeHour is used by these modules:
lumpedSpeciesName table
CREATE TABLE lumpedspeciesname (
lumpedSpeciesID smallint(6) NOT NULL,
lumpedSpeciesName varchar(20) DEFAULT NULL,
PRIMARY KEY (lumpedSpeciesID),
KEY lumpedSpeciesName (lumpedSpeciesName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The lumpedSpeciesName is used by these modules:
M6SulfurCoeff table
CREATE TABLE m6sulfurcoeff (
pollutantID smallint(6) NOT NULL,
minModelYearID smallint(6) NOT NULL,
maxModelYearID smallint(6) NOT NULL,
minSulfur double NOT NULL,
sulfurLongCoeff double DEFAULT NULL,
sulfurIRFactor double DEFAULT NULL,
maxIRFactorSulfur double DEFAULT NULL,
PRIMARY KEY (pollutantID,minModelYearID,maxModelYearID),
KEY pollutantID (pollutantID,minModelYearID,maxModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
MeanFuelParameters table
CREATE TABLE meanfuelparameters (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
fuelParameterID smallint(6) NOT NULL DEFAULT '0',
baseValue float DEFAULT NULL,
centeringValue float DEFAULT NULL,
stdDevValue float DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelTypeID,modelYearGroupID,fuelParameterID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The MeanFuelParameters is used by these modules:
mechanismName table
CREATE TABLE mechanismname (
mechanismID smallint(6) NOT NULL,
mechanismName varchar(40) DEFAULT NULL,
PRIMARY KEY (mechanismID),
KEY mechanismName (mechanismName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
metalemissionrate table
CREATE TABLE metalemissionrate (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
units char(20) DEFAULT NULL,
meanBaseRate double DEFAULT NULL,
meanBaseRateCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelTypeID,sourceTypeID,modelYearGroupID),
UNIQUE KEY XPKMetalEmissionRate (polProcessID,fuelTypeID,sourceTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The metalemissionrate is used by these modules:
methaneTHCRatio table
CREATE TABLE methanethcratio (
processID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
regClassID smallint(6) NOT NULL DEFAULT '0',
beginModelYearID smallint(6) NOT NULL DEFAULT '0',
endModelYearID smallint(6) NOT NULL DEFAULT '0',
CH4THCRatio double DEFAULT NULL,
dataSourceID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (processID,fuelSubtypeID,regClassID,beginModelYearID,endModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The methaneTHCRatio is used by these modules:
minorhapratio table
CREATE TABLE minorhapratio (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
atRatio double DEFAULT NULL,
atRatioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (fuelTypeID,fuelSubtypeID,polProcessID,modelYearGroupID),
UNIQUE KEY XPKMinorHAPRatio (fuelTypeID,fuelSubtypeID,polProcessID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The minorhapratio is used by these modules:
ModelYear table
CREATE TABLE modelyear (
modelYearID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (modelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ModelYear is used by these modules:
modelYearCutPoints table
CREATE TABLE modelyearcutpoints (
cutPointName varchar(100) NOT NULL,
modelYearID smallint(6) NOT NULL,
PRIMARY KEY (cutPointName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The modelYearCutPoints is used by these modules:
ModelYearGroup table
CREATE TABLE modelyeargroup (
modelYearGroupID int(11) NOT NULL DEFAULT '0',
shortModYrGroupID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupName char(50) DEFAULT NULL,
modelYearGroupStartYear smallint(6) DEFAULT NULL,
modelYearGroupEndYear smallint(6) DEFAULT NULL,
PRIMARY KEY (modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ModelYearGroup is used by these modules:
modelYearMapping table
CREATE TABLE modelyearmapping (
startUserModelYear smallint(6) NOT NULL,
endUserModelYear smallint(6) NOT NULL,
startStandardModelYear smallint(6) NOT NULL,
endStandardModelYear smallint(6) NOT NULL,
PRIMARY KEY (startUserModelYear,endUserModelYear)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The modelYearMapping is used by these modules:
MonthGroupHour table
CREATE TABLE monthgrouphour (
monthGroupID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
ACActivityTermA float DEFAULT NULL,
ACActivityTermACV float DEFAULT NULL,
ACActivityTermB float DEFAULT NULL,
ACActivityTermBCV float DEFAULT NULL,
ACActivityTermC float DEFAULT NULL,
ACActivityTermCCV float DEFAULT NULL,
PRIMARY KEY (hourID,monthGroupID),
KEY monthGroupID (monthGroupID),
KEY hourID (hourID),
KEY hourID_2 (hourID,monthGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The MonthGroupHour is used by these modules:
MonthGroupOfAnyYear table
CREATE TABLE monthgroupofanyyear (
monthGroupID smallint(6) NOT NULL DEFAULT '0',
monthGroupName char(50) DEFAULT NULL,
PRIMARY KEY (monthGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
MonthofAnyYear table
CREATE TABLE monthofanyyear (
monthID smallint(6) NOT NULL DEFAULT '0',
monthName char(10) DEFAULT NULL,
noOfDays smallint(6) DEFAULT NULL,
monthGroupID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (monthID),
KEY monthGroupID (monthGroupID),
KEY monthGroupID_2 (monthGroupID,monthID),
KEY monthID (monthID,monthGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The MonthofAnyYear is used by these modules:
MonthVMTFraction table
CREATE TABLE monthvmtfraction (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
monthVMTFraction float DEFAULT NULL,
PRIMARY KEY (monthID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY monthID (monthID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The MonthVMTFraction is used by these modules:
NONO2Ratio table
CREATE TABLE nono2ratio (
polProcessID int(11) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
NOxRatio float DEFAULT NULL,
NOxRatioCV float DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,sourceTypeID,fuelTypeID,modelYearGroupID),
UNIQUE KEY XPKNONO2Ratio (polProcessID,sourceTypeID,fuelTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The NONO2Ratio is used by these modules:
nrAgeCategory table
CREATE TABLE nragecategory (
ageID smallint(6) NOT NULL,
ageCategoryName char(50) DEFAULT NULL,
PRIMARY KEY (ageID),
UNIQUE KEY XPKNRAgeCategory (ageID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nratratio table
CREATE TABLE nratratio (
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
fuelSubtypeID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
atRatio double DEFAULT NULL,
atRatioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (pollutantID,processID,engTechID,fuelSubtypeID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nratratio is used by these modules:
nrBaseYearEquipPopulation table
CREATE TABLE nrbaseyearequippopulation (
sourceTypeID smallint(6) NOT NULL,
stateID smallint(6) NOT NULL,
population double NOT NULL,
NRBaseYearID smallint(6) NOT NULL,
PRIMARY KEY (sourceTypeID,stateID),
UNIQUE KEY XPKNRBaseYearEquipPopulation (sourceTypeID,stateID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrCrankcaseEmissionRate table
CREATE TABLE nrcrankcaseemissionrate (
polProcessID int(11) NOT NULL,
SCC char(10) NOT NULL,
hpMin smallint(6) NOT NULL,
hpMax smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
meanBaseRate float DEFAULT NULL,
units varchar(12) DEFAULT NULL,
dataSourceID smallint(6) NOT NULL,
PRIMARY KEY (polProcessID,SCC,hpMin,hpMax,modelYearID,engTechID),
UNIQUE KEY XPKnrCrankCaseEmissionRatio (polProcessID,SCC,hpMin,hpMax,modelYearID,engTechID),
KEY INDEX1 (polProcessID),
KEY XPFnrCrankCaseEmissionRatio (polProcessID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrDayAllocation table
CREATE TABLE nrdayallocation (
scc char(10) NOT NULL,
dayID smallint(6) NOT NULL,
dayFraction float NOT NULL,
PRIMARY KEY (scc,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrDeterioration table
CREATE TABLE nrdeterioration (
polProcessID int(11) NOT NULL,
engTechID smallint(6) NOT NULL,
DFCoefficient float DEFAULT NULL,
DFAgeExponent float DEFAULT NULL,
emissionCap smallint(6) NOT NULL,
PRIMARY KEY (polProcessID,engTechID),
UNIQUE KEY XPKNRDeterioration (polProcessID,engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrdioxinemissionrate table
CREATE TABLE nrdioxinemissionrate (
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
engtechID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
units char(30) DEFAULT NULL,
meanBaseRate double DEFAULT NULL,
meanBaseRateCV double DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (pollutantID,processID,fuelTypeID,engtechID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrdioxinemissionrate is used by these modules:
nrEmissionRate table
CREATE TABLE nremissionrate (
polProcessID int(11) NOT NULL,
SCC char(10) NOT NULL,
hpMin smallint(6) NOT NULL,
hpMax smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
meanBaseRate float DEFAULT NULL,
units varchar(12) DEFAULT NULL,
dataSourceID smallint(6) NOT NULL,
PRIMARY KEY (polProcessID,SCC,hpMin,hpMax,modelYearID,engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrEngtechFraction table
CREATE TABLE nrengtechfraction (
SCC char(10) NOT NULL,
hpMin smallint(6) NOT NULL,
hpMax smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
processGroupID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
NREngTechFraction float DEFAULT NULL,
PRIMARY KEY (SCC,hpMin,hpMax,modelYearID,processGroupID,engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrEquipmentType table
CREATE TABLE nrequipmenttype (
NREquipTypeID smallint(6) NOT NULL,
description char(40) DEFAULT NULL,
sectorID smallint(6) NOT NULL,
useDefaultScrappage char(1) DEFAULT NULL,
surrogateID smallint(6) DEFAULT NULL,
PRIMARY KEY (NREquipTypeID),
UNIQUE KEY XPKNREquipmentType (NREquipTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrEvapEmissionRate table
CREATE TABLE nrevapemissionrate (
polProcessID int(11) NOT NULL,
SCC char(10) NOT NULL,
hpMin smallint(6) NOT NULL,
hpMax smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
meanBaseRate float DEFAULT NULL,
units varchar(12) DEFAULT NULL,
dataSourceID smallint(6) NOT NULL,
PRIMARY KEY (polProcessID,SCC,hpMin,hpMax,modelYearID,engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrFuelSubtype table
CREATE TABLE nrfuelsubtype (
fuelSubtypeID smallint(6) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
fuelSubtypeDesc char(50) DEFAULT NULL,
fuelSubtypePetroleumFraction float DEFAULT NULL,
fuelSubtypePetroleumFractionCV float DEFAULT NULL,
fuelSubtypeFossilFraction float DEFAULT NULL,
fuelSubtypeFossilFractionCV float DEFAULT NULL,
carbonContent float DEFAULT NULL,
oxidationFraction float DEFAULT NULL,
carbonContentCV float DEFAULT NULL,
oxidationFractionCV float DEFAULT NULL,
energyContent float DEFAULT NULL,
PRIMARY KEY (fuelSubtypeID),
KEY fuelTypeID (fuelTypeID,fuelSubtypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrFuelSupply table
CREATE TABLE nrfuelsupply (
fuelRegionID int(11) NOT NULL DEFAULT '0',
fuelYearID int(11) NOT NULL DEFAULT '0',
monthGroupID smallint(6) NOT NULL DEFAULT '0',
fuelFormulationID smallint(6) NOT NULL DEFAULT '0',
marketShare float DEFAULT NULL,
marketShareCV float DEFAULT NULL,
PRIMARY KEY (fuelRegionID,fuelFormulationID,monthGroupID,fuelYearID),
KEY countyID (fuelRegionID),
KEY yearID (fuelYearID),
KEY monthGroupID (monthGroupID),
KEY fuelSubtypeID (fuelFormulationID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrFuelType table
CREATE TABLE nrfueltype (
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
defaultFormulationID smallint(6) NOT NULL DEFAULT '0',
fuelTypeDesc char(50) DEFAULT NULL,
humidityCorrectionCoeff float DEFAULT NULL,
humidityCorrectionCoeffCV float DEFAULT NULL,
fuelDensity float DEFAULT NULL,
subjectToEvapCalculations char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrGrowthIndex table
CREATE TABLE nrgrowthindex (
growthPatternID smallint(6) NOT NULL,
yearID smallint(6) NOT NULL,
growthIndex smallint(6) DEFAULT NULL,
PRIMARY KEY (growthPatternID,yearID),
UNIQUE KEY XPKNRGrowthIndex (growthPatternID,yearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrGrowthPattern table
CREATE TABLE nrgrowthpattern (
growthPatternID smallint(6) NOT NULL,
description char(80) DEFAULT NULL,
PRIMARY KEY (growthPatternID),
UNIQUE KEY XPKNRGrowthPattern (growthPatternID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrGrowthPatternFinder table
CREATE TABLE nrgrowthpatternfinder (
SCC char(10) NOT NULL,
stateID smallint(6) NOT NULL,
growthPatternID smallint(6) NOT NULL,
PRIMARY KEY (SCC,stateID),
UNIQUE KEY XPKNRGrowthPatternFinder (SCC,stateID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrhcspeciation table
CREATE TABLE nrhcspeciation (
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
fuelSubtypeID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
speciationConstant double DEFAULT NULL,
speciationConstantCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (pollutantID,processID,engTechID,fuelSubtypeID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrhcspeciation is used by these modules:
nrHourAllocation table
CREATE TABLE nrhourallocation (
NRHourAllocPatternID smallint(6) NOT NULL,
hourID smallint(6) NOT NULL,
hourFraction float NOT NULL,
PRIMARY KEY (NRHourAllocPatternID,hourID),
UNIQUE KEY XPKNRHourAllocation (NRHourAllocPatternID,hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrHourAllocPattern table
CREATE TABLE nrhourallocpattern (
NRHourAllocPatternID smallint(6) NOT NULL,
description char(255) NOT NULL,
PRIMARY KEY (NRHourAllocPatternID),
UNIQUE KEY XPKNRHourAllocPattern (NRHourAllocPatternID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrHourPatternFinder table
CREATE TABLE nrhourpatternfinder (
NREquipTypeID smallint(6) NOT NULL,
NRHourAllocPatternID smallint(6) DEFAULT NULL,
PRIMARY KEY (NREquipTypeID),
UNIQUE KEY XPKNRHourPatternFinder (NREquipTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrhpcategory table
CREATE TABLE nrhpcategory (
nrhprangebinid smallint(6) NOT NULL,
engtechid smallint(6) NOT NULL,
nrhpcategory char(1) DEFAULT NULL,
PRIMARY KEY (nrhprangebinid,engtechid)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrhpcategory is used by these modules:
nrHPRangeBin table
CREATE TABLE nrhprangebin (
NRHPRangeBinID smallint(6) NOT NULL,
binName char(20) DEFAULT NULL,
hpMin smallint(6) DEFAULT NULL,
hpMax smallint(6) DEFAULT NULL,
engSizeID smallint(6) NOT NULL,
PRIMARY KEY (NRHPRangeBinID),
UNIQUE KEY XPKNRHPRangeBin (NRHPRangeBinID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrintegratedspecies table
CREATE TABLE nrintegratedspecies (
pollutantID smallint(6) NOT NULL,
PRIMARY KEY (pollutantID)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrintegratedspecies is used by these modules:
nrmetalemissionrate table
CREATE TABLE nrmetalemissionrate (
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
units char(12) DEFAULT NULL,
meanBaseRate double DEFAULT NULL,
meanBaseRateCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (pollutantID,processID,fuelTypeID,engTechID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrmetalemissionrate is used by these modules:
nrmethanethcratio table
CREATE TABLE nrmethanethcratio (
processID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
fuelSubtypeID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
CH4THCRatio double DEFAULT NULL,
CH4THCRatioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (processID,fuelSubtypeID,engTechID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrmethanethcratio is used by these modules:
nrMonthAllocation table
CREATE TABLE nrmonthallocation (
SCC char(10) NOT NULL,
stateID smallint(6) NOT NULL,
monthID smallint(6) NOT NULL,
monthFraction float NOT NULL,
PRIMARY KEY (SCC,stateID,monthID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrpahgasratio table
CREATE TABLE nrpahgasratio (
pollutantID smallint(6) NOT NULL,
processid smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
atratio double DEFAULT NULL,
atratioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (pollutantID,processid,fuelTypeID,engTechID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrpahgasratio is used by these modules:
nrpahparticleratio table
CREATE TABLE nrpahparticleratio (
pollutantID smallint(6) NOT NULL,
processid smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
nrHPCategory char(1) NOT NULL,
atratio double DEFAULT NULL,
atratioCV double DEFAULT NULL,
datasourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (pollutantID,processid,fuelTypeID,engTechID,nrHPCategory)
) ENGINE=MyISAM DEFAULT CHARSET=utf8
The nrpahparticleratio is used by these modules:
nrRetrofitFactors table
CREATE TABLE nrretrofitfactors (
retrofitStartYear smallint(6) NOT NULL,
retrofitEndYear smallint(6) NOT NULL,
StartModelYear smallint(6) NOT NULL,
EndModelYear smallint(6) NOT NULL,
SCC char(10) NOT NULL,
engTechID smallint(6) NOT NULL,
hpMin smallint(6) NOT NULL,
hpMax smallint(6) NOT NULL,
pollutantID smallint(6) NOT NULL,
retrofitID smallint(6) NOT NULL,
annualFractionRetrofit float DEFAULT NULL,
retrofitEffectiveFraction float DEFAULT NULL,
PRIMARY KEY (SCC,engTechID,hpMin,hpMax,pollutantID,retrofitID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrSCC table
CREATE TABLE nrscc (
SCC char(10) NOT NULL,
NREquipTypeID smallint(6) NOT NULL,
description char(40) DEFAULT NULL,
fuelTypeID smallint(6) NOT NULL,
PRIMARY KEY (SCC),
UNIQUE KEY XPKNRSCC (SCC)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrScrappageCurve table
CREATE TABLE nrscrappagecurve (
NREquipTypeID smallint(6) NOT NULL,
fractionLifeused float NOT NULL,
percentageScrapped float DEFAULT NULL,
PRIMARY KEY (NREquipTypeID,fractionLifeused),
UNIQUE KEY XPKNRScrappageCurve (NREquipTypeID,fractionLifeused)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrSourceUseType table
CREATE TABLE nrsourceusetype (
sourceTypeID smallint(6) NOT NULL,
SCC char(10) NOT NULL,
NRHPRangeBinID smallint(6) NOT NULL,
medianLifeFullLoad float DEFAULT NULL,
hoursUsedPerYear float DEFAULT NULL,
loadFactor float DEFAULT NULL,
hpAvg float DEFAULT NULL,
isPumpFilled char(1) DEFAULT NULL,
tankUnits char(7) DEFAULT NULL,
tankSize float DEFAULT NULL,
tankFillFrac float DEFAULT NULL,
tankMetalFrac float DEFAULT NULL,
hoseLength float DEFAULT NULL,
hoseDiameter float DEFAULT NULL,
hoseMetalFrac float DEFAULT NULL,
marineFillNeckHoseLength float DEFAULT NULL,
marineFillNeckHoseDiameter float DEFAULT NULL,
marineSupplyHoseLength float DEFAULT NULL,
marineSupplyHoseDiameter float DEFAULT NULL,
marineVentHoseLength float DEFAULT NULL,
marineVentHoseDiameter float DEFAULT NULL,
hotSoaksPerSHO float DEFAULT NULL,
nonInstMarineTankFrac float DEFAULT NULL,
marineInstPlasticTankTrailFrac float NOT NULL,
marineInstPlasticTankWaterFrac float DEFAULT NULL,
marineInstMetalTankTrailerFrac float DEFAULT NULL,
marineInstMetalTankWaterFrac float DEFAULT NULL,
e10TankPermeationAdjFac float DEFAULT NULL,
e10HosePermeationAdjFac float DEFAULT NULL,
e10MarineFillNeckPermAdjFac float DEFAULT NULL,
e10MarineSupplyHosePermAdjFac float DEFAULT NULL,
e10MarineVentHosePermAdjFac float DEFAULT NULL,
PRIMARY KEY (sourceTypeID),
UNIQUE KEY XPKNRSourceUseType (sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrStateSurrogate table
CREATE TABLE nrstatesurrogate (
surrogateID smallint(6) NOT NULL DEFAULT '0',
stateID smallint(6) NOT NULL DEFAULT '0',
countyID int(11) NOT NULL DEFAULT '0',
surrogatequant double NOT NULL,
surrogateYearID smallint(6) NOT NULL DEFAULT '2002',
PRIMARY KEY (surrogateID,stateID,countyID,surrogateYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrSulfurAdjustment table
CREATE TABLE nrsulfuradjustment (
fuelTypeID smallint(6) NOT NULL,
engTechID smallint(6) NOT NULL,
PMBaseSulfur float NOT NULL,
sulfatePMConversionFactor float NOT NULL,
PRIMARY KEY (fuelTypeID,engTechID),
UNIQUE KEY XPKNRSulfurAdjustment (fuelTypeID,engTechID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrSurrogate table
CREATE TABLE nrsurrogate (
surrogateID smallint(6) NOT NULL,
description char(255) DEFAULT NULL,
surrogateAbbr char(3) DEFAULT NULL,
PRIMARY KEY (surrogateID),
UNIQUE KEY XPKNRSurrogate (surrogateID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
nrUSMonthAllocation table
CREATE TABLE nrusmonthallocation (
SCC char(10) NOT NULL,
stateID smallint(6) NOT NULL,
monthID smallint(6) NOT NULL,
monthFraction float NOT NULL,
PRIMARY KEY (SCC,stateID,monthID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
offNetworkLink table
CREATE TABLE offnetworklink (
sourceTypeID smallint(6) NOT NULL,
zoneID int(11) NOT NULL DEFAULT '0',
vehiclePopulation float DEFAULT NULL,
startFraction float DEFAULT NULL,
extendedIdleFraction float DEFAULT NULL,
parkedVehicleFraction float DEFAULT NULL,
PRIMARY KEY (zoneID,sourceTypeID),
KEY sourceTypeID (sourceTypeID,zoneID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The offNetworkLink is used by these modules:
OMDGPolProcessRepresented table
CREATE TABLE omdgpolprocessrepresented (
polProcessID int(11) NOT NULL,
representingPolProcessID int(11) NOT NULL,
PRIMARY KEY (polProcessID),
KEY representingPolProcessID (representingPolProcessID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The OMDGPolProcessRepresented is used by these modules:
onRoadRetrofit table
CREATE TABLE onroadretrofit (
pollutantID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
retrofitYearID smallint(6) NOT NULL,
beginModelYearID smallint(6) NOT NULL,
endModelYearID smallint(6) NOT NULL,
cumFractionRetrofit double NOT NULL DEFAULT '0',
retrofitEffectiveFraction double NOT NULL DEFAULT '0',
PRIMARY KEY (pollutantID,processID,fuelTypeID,sourceTypeID,retrofitYearID,beginModelYearID,endModelYearID),
KEY retrofitYearID (retrofitYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
OperatingMode table
CREATE TABLE operatingmode (
opModeID smallint(6) NOT NULL DEFAULT '0',
opModeName char(50) DEFAULT NULL,
VSPLower float DEFAULT NULL,
VSPUpper float DEFAULT NULL,
speedLower float DEFAULT NULL,
speedUpper float DEFAULT NULL,
brakeRate1Sec float DEFAULT NULL,
brakeRate3Sec float DEFAULT NULL,
minSoakTime smallint(6) DEFAULT NULL,
maxSoakTime smallint(6) DEFAULT NULL,
PRIMARY KEY (opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The OperatingMode is used by these modules:
OpModeDistribution table
CREATE TABLE opmodedistribution (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
linkID int(11) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
opModeFraction float DEFAULT NULL,
opModeFractionCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (hourDayID,linkID,opModeID,polProcessID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY hourDayID (hourDayID),
KEY linkID (linkID),
KEY polProcessID (polProcessID),
KEY opModeID (opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The OpModeDistribution is used by these modules:
OpModePolProcAssoc table
CREATE TABLE opmodepolprocassoc (
polProcessID int(11) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (opModeID,polProcessID),
KEY polProcessID (polProcessID),
KEY opModeID (opModeID),
KEY opModeID_2 (opModeID,polProcessID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The OpModePolProcAssoc is used by these modules:
OxyThreshName table
CREATE TABLE oxythreshname (
oxyThreshID smallint(6) NOT NULL DEFAULT '0',
oxyThreshName char(100) DEFAULT NULL,
PRIMARY KEY (oxyThreshID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
pahGasRatio table
CREATE TABLE pahgasratio (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
atRatio double DEFAULT NULL,
atRatioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelTypeID,modelYearGroupID),
UNIQUE KEY XPKPAHGasRatio (polProcessID,fuelTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The pahGasRatio is used by these modules:
pahParticleRatio table
CREATE TABLE pahparticleratio (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
atRatio double DEFAULT NULL,
atRatioCV double DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelTypeID,modelYearGroupID),
UNIQUE KEY XPKPAHParticleRatio (polProcessID,fuelTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The pahParticleRatio is used by these modules:
PM10EmissionRatio table
CREATE TABLE pm10emissionratio (
polProcessID int(11) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
PM10PM25Ratio float NOT NULL,
PM10PM25RatioCV float DEFAULT NULL,
minModelYearID smallint(6) NOT NULL DEFAULT '1940',
maxModelYearID smallint(6) NOT NULL DEFAULT '2050',
PRIMARY KEY (polProcessID,sourceTypeID,fuelTypeID,minModelYearID,maxModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The PM10EmissionRatio is used by these modules:
PMSpeciation table
CREATE TABLE pmspeciation (
processID smallint(6) NOT NULL,
inputPollutantID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
minModelYearID smallint(6) NOT NULL,
maxModelYearID smallint(6) NOT NULL,
outputPollutantID smallint(6) NOT NULL,
pmSpeciationFraction double NOT NULL,
PRIMARY KEY (processID,inputPollutantID,sourceTypeID,fuelTypeID,minModelYearID,maxModelYearID,outputPollutantID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The PMSpeciation is used by these modules:
Pollutant table
CREATE TABLE pollutant (
pollutantID smallint(6) NOT NULL DEFAULT '0',
pollutantName char(50) DEFAULT NULL,
energyOrMass char(6) NOT NULL DEFAULT '',
globalWarmingPotential smallint(6) DEFAULT NULL,
NEIPollutantCode char(10) DEFAULT NULL,
pollutantDisplayGroupID smallint(6) DEFAULT NULL,
shortName varchar(50) DEFAULT NULL,
isAffectedByOnroad tinyint(1) DEFAULT '1',
isAffectedByNonroad tinyint(1) DEFAULT '0',
PRIMARY KEY (pollutantID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The Pollutant is used by these modules:
PollutantProcessAssoc table
CREATE TABLE pollutantprocessassoc (
polProcessID int(11) NOT NULL DEFAULT '0',
processID smallint(6) NOT NULL DEFAULT '0',
pollutantID smallint(6) NOT NULL DEFAULT '0',
isAffectedByExhaustIM char(1) NOT NULL DEFAULT 'N',
isAffectedByEvapIM char(1) NOT NULL DEFAULT 'N',
chainedto1 int(11) DEFAULT NULL,
chainedto2 int(11) DEFAULT NULL,
isAffectedByOnroad tinyint(1) DEFAULT '1',
isAffectedByNonroad tinyint(1) DEFAULT '0',
nrChainedTo1 int(11) DEFAULT NULL,
nrChainedTo2 int(11) DEFAULT NULL,
PRIMARY KEY (polProcessID),
KEY processID (processID),
KEY pollutantID (pollutantID),
KEY processID_2 (processID,pollutantID,polProcessID),
KEY pollutantID_2 (pollutantID,processID,polProcessID),
KEY polProcessID (polProcessID,processID,pollutantID),
KEY polProcessID_2 (polProcessID,pollutantID,processID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The PollutantProcessAssoc is used by these modules:
PollutantProcessModelYear table
CREATE TABLE pollutantprocessmodelyear (
polProcessID int(11) NOT NULL DEFAULT '0',
modelYearID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
fuelMYGroupID int(11) DEFAULT NULL,
IMModelYearGroupID int(11) DEFAULT NULL,
PRIMARY KEY (modelYearID,polProcessID),
KEY polProcessID (modelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The PollutantProcessModelYear is used by these modules:
processDisplayGroup table
CREATE TABLE processdisplaygroup (
processDisplayGroupID smallint(6) NOT NULL,
processDisplayGroupName char(50) NOT NULL,
disPlayAsGroup char(1) NOT NULL,
PRIMARY KEY (processDisplayGroupID),
UNIQUE KEY XPKProcessDisplayGroup (processDisplayGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
processGroupID table
CREATE TABLE processgroupid (
processGroupID smallint(6) NOT NULL,
processGroupName char(15) NOT NULL,
PRIMARY KEY (processGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
RefuelingFactors table
CREATE TABLE refuelingfactors (
fuelTypeID smallint(6) NOT NULL,
defaultFormulationID smallint(6) DEFAULT NULL,
vaporTermA float NOT NULL DEFAULT '0',
vaporTermB float NOT NULL DEFAULT '0',
vaporTermC float NOT NULL DEFAULT '0',
vaporTermD float NOT NULL DEFAULT '0',
vaporTermE float NOT NULL DEFAULT '0',
vaporTermF float NOT NULL DEFAULT '0',
vaporLowTLimit float NOT NULL DEFAULT '0',
vaporHighTLimit float NOT NULL DEFAULT '0',
tankTDiffLimit float NOT NULL DEFAULT '0',
minimumRefuelingVaporLoss float NOT NULL DEFAULT '0',
refuelingSpillRate float NOT NULL DEFAULT '0',
refuelingSpillRateCV float NOT NULL DEFAULT '0',
displacedVaporRateCV float NOT NULL DEFAULT '0',
PRIMARY KEY (fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The RefuelingFactors is used by these modules:
region table
CREATE TABLE region (
regionID int(11) NOT NULL,
VV smallint(6) DEFAULT NULL,
WW smallint(6) DEFAULT NULL,
XX smallint(6) DEFAULT NULL,
YY smallint(6) DEFAULT NULL,
ZZ smallint(6) DEFAULT NULL,
description varchar(150) DEFAULT NULL,
PRIMARY KEY (regionID),
KEY index1 (regionID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
regionCode table
CREATE TABLE regioncode (
regionCodeID int(11) NOT NULL,
regionCodeDescription varchar(200) NOT NULL DEFAULT '',
PRIMARY KEY (regionCodeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
regionCounty table
CREATE TABLE regioncounty (
regionID int(11) NOT NULL,
countyID int(11) NOT NULL,
regionCodeID int(11) NOT NULL,
fuelYearID int(11) NOT NULL,
PRIMARY KEY (regionID,countyID,regionCodeID,fuelYearID),
KEY countyID (countyID,fuelYearID,regionCodeID,regionID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
RegulatoryClass table
CREATE TABLE regulatoryclass (
regClassID smallint(6) NOT NULL DEFAULT '0',
regClassName char(25) DEFAULT NULL,
regClassDesc char(100) DEFAULT NULL,
PRIMARY KEY (regClassID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The RegulatoryClass is used by these modules:
RetrofitInputAssociations table
CREATE TABLE retrofitinputassociations (
listName varchar(20) NOT NULL,
commonName varchar(50) NOT NULL,
idealName varchar(50) NOT NULL,
PRIMARY KEY (listName,commonName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
RoadType table
CREATE TABLE roadtype (
roadTypeID smallint(6) NOT NULL DEFAULT '0',
roadDesc char(50) DEFAULT NULL,
isAffectedByOnroad tinyint(1) DEFAULT '1',
isAffectedByNonroad tinyint(1) DEFAULT '0',
shouldDisplay tinyint(1) DEFAULT '1',
PRIMARY KEY (roadTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The RoadType is used by these modules:
RoadTypeDistribution table
CREATE TABLE roadtypedistribution (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
roadTypeVMTFraction float DEFAULT NULL,
PRIMARY KEY (roadTypeID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY roadTypeID (roadTypeID),
KEY roadTypeID_2 (roadTypeID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The RoadTypeDistribution is used by these modules:
SampleVehicleDay table
CREATE TABLE samplevehicleday (
vehID int(11) NOT NULL DEFAULT '0',
dayID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (vehID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SampleVehicleDay is used by these modules:
sampleVehiclePopulation table
CREATE TABLE samplevehiclepopulation (
sourceTypeModelYearID int(10) unsigned NOT NULL,
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearID smallint(6) NOT NULL DEFAULT '0',
fuelTypeID smallint(5) unsigned NOT NULL,
engTechID smallint(6) NOT NULL,
regClassID smallint(5) unsigned NOT NULL,
stmyFuelEngFraction double NOT NULL,
stmyFraction double NOT NULL,
PRIMARY KEY (sourceTypeModelYearID,fuelTypeID,engTechID,regClassID),
KEY stmyft (sourceTypeID,modelYearID,fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 DELAY_KEY_WRITE=1
The sampleVehiclePopulation is used by these modules:
sampleVehicleSoaking table
CREATE TABLE samplevehiclesoaking (
soakDayID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
hourID smallint(6) NOT NULL,
soakFraction double DEFAULT NULL,
PRIMARY KEY (soakDayID,sourceTypeID,dayID,hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The sampleVehicleSoaking is used by these modules:
sampleVehicleSoakingDay table
CREATE TABLE samplevehiclesoakingday (
soakDayID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
F double DEFAULT NULL,
PRIMARY KEY (soakDayID,sourceTypeID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The sampleVehicleSoakingDay is used by these modules:
sampleVehicleSoakingDayBasis table
CREATE TABLE samplevehiclesoakingdaybasis (
soakDayID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
F double DEFAULT NULL,
PRIMARY KEY (soakDayID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The sampleVehicleSoakingDayBasis is used by these modules:
sampleVehicleSoakingDayBasisUsed table
CREATE TABLE samplevehiclesoakingdaybasisused (
soakDayID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
F double DEFAULT NULL,
PRIMARY KEY (soakDayID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
sampleVehicleSoakingDayUsed table
CREATE TABLE samplevehiclesoakingdayused (
soakDayID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
F double DEFAULT NULL,
PRIMARY KEY (soakDayID,sourceTypeID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
SampleVehicleTrip table
CREATE TABLE samplevehicletrip (
vehID int(11) NOT NULL DEFAULT '0',
dayID smallint(6) NOT NULL DEFAULT '0',
tripID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) DEFAULT NULL,
priorTripID smallint(6) DEFAULT NULL,
keyontime int(11) DEFAULT NULL,
keyOffTime int(11) NOT NULL DEFAULT '0',
PRIMARY KEY (vehID,dayID,tripID),
KEY vehID (vehID),
KEY tripID (tripID),
KEY idxPriorTripID (priorTripID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SampleVehicleTrip is used by these modules:
scc table
CREATE TABLE scc (
SCC char(10) NOT NULL DEFAULT '',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
processID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (SCC),
KEY fuelTypeID (fuelTypeID),
KEY sourceTypeID (sourceTypeID),
KEY roadTypeID (roadTypeID),
KEY processID (processID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
Sector table
CREATE TABLE sector (
sectorID smallint(6) NOT NULL,
description char(40) DEFAULT NULL,
PRIMARY KEY (sectorID),
UNIQUE KEY XPKSector (sectorID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
SHO table
CREATE TABLE sho (
hourDayID smallint(6) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
linkID int(11) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
SHO float DEFAULT NULL,
SHOCV float DEFAULT NULL,
distance float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (ageID,hourDayID,linkID,monthID,sourceTypeID,yearID),
KEY hourDayID (hourDayID),
KEY monthID (monthID),
KEY yearID (yearID),
KEY ageID (ageID),
KEY linkID (linkID),
KEY sourceTypeID (sourceTypeID),
KEY linkID_2 (linkID,yearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SHO is used by these modules:
SizeWeightFraction table
CREATE TABLE sizeweightfraction (
sourceTypeModelYearID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
engTechID smallint(6) NOT NULL DEFAULT '0',
engSizeID smallint(6) NOT NULL DEFAULT '0',
weightClassID smallint(6) NOT NULL DEFAULT '0',
sizeWeightFraction float DEFAULT NULL,
PRIMARY KEY (engSizeID,engTechID,fuelTypeID,sourceTypeModelYearID,weightClassID),
KEY yearFuelTech (sourceTypeModelYearID,engTechID,fuelTypeID),
KEY engTechID (engTechID),
KEY engSizeID (engSizeID),
KEY weightClassID (weightClassID),
KEY sourceTypeModelYearID (sourceTypeModelYearID),
KEY fuelTypeID (fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
SoakActivityFraction table
CREATE TABLE soakactivityfraction (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
zoneID int(11) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
soakActivityFraction float DEFAULT NULL,
soakActivityFractionCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (sourceTypeID,zoneID,monthID,hourDayID,opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SoakActivityFraction is used by these modules:
SourceBin table
CREATE TABLE sourcebin (
sourceBinID bigint(20) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
engTechID smallint(6) NOT NULL DEFAULT '0',
regClassID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
engSizeID smallint(6) NOT NULL DEFAULT '0',
weightClassID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (sourceBinID),
KEY fuelTypeID (fuelTypeID),
KEY modelYearGroupID (modelYearGroupID),
KEY sourceBinID (sourceBinID,fuelTypeID,modelYearGroupID),
KEY sourceBinID_2 (sourceBinID,modelYearGroupID,fuelTypeID),
KEY fuelTypeID_2 (fuelTypeID,modelYearGroupID,sourceBinID),
KEY fuelTypeID_3 (fuelTypeID,sourceBinID,modelYearGroupID),
KEY modelYearGroupID_2 (modelYearGroupID,fuelTypeID,sourceBinID),
KEY modelYearGroupID_3 (modelYearGroupID,sourceBinID,fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceBin is used by these modules:
SourceBinDistribution table
CREATE TABLE sourcebindistribution (
sourceTypeModelYearID int(11) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
sourceBinID bigint(20) NOT NULL DEFAULT '0',
sourceBinActivityFraction float DEFAULT NULL,
sourceBinActivityFractionCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (polProcessID,sourceBinID,sourceTypeModelYearID),
KEY sourceTypeModelYearID (sourceTypeModelYearID),
KEY polProcessID (polProcessID),
KEY sourceBinID (sourceBinID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceBinDistribution is used by these modules:
SourceHours table
CREATE TABLE sourcehours (
hourDayID smallint(6) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
linkID int(11) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
sourceHours float DEFAULT NULL,
sourceHoursCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (hourDayID,monthID,yearID,ageID,linkID,sourceTypeID),
KEY hourDayID (hourDayID),
KEY monthID (monthID),
KEY yearID (yearID),
KEY ageID (ageID),
KEY linkID (linkID),
KEY sourceTypeID (sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceHours is used by these modules:
SourceTypeAge table
CREATE TABLE sourcetypeage (
ageID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
survivalRate double DEFAULT NULL,
relativeMAR double DEFAULT NULL,
functioningACFraction double DEFAULT NULL,
functioningACFractionCV double DEFAULT NULL,
PRIMARY KEY (ageID,sourceTypeID),
KEY ageID (ageID),
KEY sourceTypeID (sourceTypeID),
KEY sourceTypeID_2 (sourceTypeID,ageID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeAge is used by these modules:
SourceTypeAgeDistribution table
CREATE TABLE sourcetypeagedistribution (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
ageFraction double DEFAULT NULL,
PRIMARY KEY (ageID,sourceTypeID,yearID),
KEY sourceTypeID (sourceTypeID),
KEY yearID (yearID),
KEY ageID (ageID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeAgeDistribution is used by these modules:
SourceTypeDayVMT table
CREATE TABLE sourcetypedayvmt (
yearID smallint(6) NOT NULL,
monthID smallint(6) NOT NULL,
dayID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
VMT double NOT NULL,
PRIMARY KEY (yearID,monthID,dayID,sourceTypeID),
KEY sourceTypeID (sourceTypeID,yearID,monthID,dayID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeDayVMT is used by these modules:
SourceTypeHour table
CREATE TABLE sourcetypehour (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
idleSHOFactor float DEFAULT NULL,
hotellingdist double DEFAULT NULL,
PRIMARY KEY (hourDayID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY hourDayID (hourDayID),
KEY hourDayID_2 (hourDayID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeHour is used by these modules:
SourceTypeModelYear table
CREATE TABLE sourcetypemodelyear (
sourceTypeModelYearID int(11) NOT NULL DEFAULT '0',
modelYearID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
ACPenetrationFraction float DEFAULT NULL,
ACPenetrationFractionCV float DEFAULT NULL,
PRIMARY KEY (sourceTypeModelYearID),
KEY modelYearID (modelYearID),
KEY sourceTypeID (sourceTypeID),
KEY sourceTypeModelYearID (sourceTypeModelYearID,modelYearID,sourceTypeID),
KEY sourceTypeModelYearID_2 (sourceTypeModelYearID,sourceTypeID,modelYearID),
KEY sourceTypeID_2 (sourceTypeID,modelYearID,sourceTypeModelYearID),
KEY modelYearID_2 (modelYearID,sourceTypeID,sourceTypeModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeModelYear is used by these modules:
SourceTypeModelYearGroup table
CREATE TABLE sourcetypemodelyeargroup (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
tankTemperatureGroupID smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (sourceTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeModelYearGroup is used by these modules:
SourceTypePolProcess table
CREATE TABLE sourcetypepolprocess (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
isSizeWeightReqd char(1) DEFAULT NULL,
isRegClassReqd char(1) DEFAULT NULL,
isMYGroupReqd char(1) DEFAULT NULL,
PRIMARY KEY (polProcessID,sourceTypeID),
KEY sourceTypeID (sourceTypeID),
KEY polProcessID (polProcessID),
KEY polProcessID_2 (polProcessID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypePolProcess is used by these modules:
SourceTypeTechAdjustment table
CREATE TABLE sourcetypetechadjustment (
processID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
modelYearID smallint(6) NOT NULL,
refuelingTechAdjustment float NOT NULL DEFAULT '0',
PRIMARY KEY (processID,sourceTypeID,modelYearID),
KEY processID (processID),
KEY sourceTypeID (sourceTypeID),
KEY modelYearID (modelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeTechAdjustment is used by these modules:
SourceTypeYear table
CREATE TABLE sourcetypeyear (
yearID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
salesGrowthFactor double DEFAULT NULL,
sourceTypePopulation double DEFAULT NULL,
migrationrate double DEFAULT NULL,
PRIMARY KEY (sourceTypeID,yearID),
KEY yearID (yearID),
KEY sourceTypeID (sourceTypeID),
KEY sourceTypeID_2 (sourceTypeID,yearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeYear is used by these modules:
SourceTypeYearVMT table
CREATE TABLE sourcetypeyearvmt (
yearID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
VMT double NOT NULL,
PRIMARY KEY (yearID,sourceTypeID),
KEY sourceTypeID (sourceTypeID,yearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceTypeYearVMT is used by these modules:
SourceUseType table
CREATE TABLE sourceusetype (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
HPMSVtypeID smallint(6) NOT NULL DEFAULT '0',
sourceTypeName char(50) DEFAULT NULL,
PRIMARY KEY (sourceTypeID),
KEY HPMSVtypeID (HPMSVtypeID),
KEY sourceTypeID (sourceTypeID,HPMSVtypeID),
KEY HPMSVtypeID_2 (HPMSVtypeID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SourceUseType is used by these modules:
sourceUseTypePhysics table
CREATE TABLE sourceusetypephysics (
sourceTypeID smallint(6) NOT NULL,
regClassID smallint(6) NOT NULL,
beginModelYearID smallint(6) NOT NULL,
endModelYearID smallint(6) NOT NULL,
rollingTermA float DEFAULT NULL,
rotatingTermB float DEFAULT NULL,
dragTermC float DEFAULT NULL,
sourceMass float DEFAULT NULL,
fixedMassFactor float DEFAULT NULL,
PRIMARY KEY (sourceTypeID,regClassID,beginModelYearID,endModelYearID) USING BTREE,
KEY beginModelYearID (beginModelYearID,endModelYearID,sourceTypeID,regClassID) USING BTREE
) ENGINE=MyISAM DEFAULT CHARSET=latin1
Starts table
CREATE TABLE starts (
hourDayID smallint(6) NOT NULL DEFAULT '0',
monthID smallint(6) NOT NULL DEFAULT '0',
yearID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
zoneID int(11) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
starts float DEFAULT NULL,
StartsCV float DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (ageID,hourDayID,monthID,sourceTypeID,yearID,zoneID),
KEY hourDayID (hourDayID),
KEY monthID (monthID),
KEY yearID (yearID),
KEY ageID (ageID),
KEY zoneID (zoneID),
KEY sourceTypeID (sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The Starts is used by these modules:
startsHourFraction table
CREATE TABLE startshourfraction (
dayID smallint(6) NOT NULL,
hourID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
allocationFraction double NOT NULL,
PRIMARY KEY (dayID,hourID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
startsMonthAdjust table
CREATE TABLE startsmonthadjust (
monthID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
monthAdjustment double NOT NULL,
PRIMARY KEY (monthID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
startsOpModeDistribution table
CREATE TABLE startsopmodedistribution (
dayID smallint(6) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
opModeFraction double DEFAULT NULL,
isUserInput char(1) NOT NULL DEFAULT 'N',
PRIMARY KEY (dayID,hourID,sourceTypeID,ageID,opModeID),
KEY dayID (dayID),
KEY hourid (hourID),
KEY sourceTypeID (sourceTypeID),
KEY ageID (ageID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
startsPerDay table
CREATE TABLE startsperday (
dayID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
startsPerDay double DEFAULT NULL,
PRIMARY KEY (sourceTypeID,ageID,dayID),
KEY hourDayID (dayID),
KEY ageID (ageID),
KEY sourceTypeID (sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
startsPerDayPerVehicle table
CREATE TABLE startsperdaypervehicle (
dayID smallint(6) NOT NULL DEFAULT '0',
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
ageID smallint(6) NOT NULL DEFAULT '0',
startsPerDayPerVehicle double DEFAULT NULL,
PRIMARY KEY (sourceTypeID,ageID,dayID),
KEY hourDayID (dayID),
KEY ageID (ageID),
KEY sourceTypeID (sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
StartsPerVehicle table
CREATE TABLE startspervehicle (
sourceTypeID smallint(6) NOT NULL DEFAULT '0',
hourDayID smallint(6) NOT NULL DEFAULT '0',
startsPerVehicle float DEFAULT NULL,
startsPerVehicleCV float DEFAULT NULL,
PRIMARY KEY (sourceTypeID,hourDayID),
KEY sourceTypeID (sourceTypeID),
KEY hourDayID (hourDayID),
KEY hourDayID_2 (hourDayID,sourceTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The StartsPerVehicle is used by these modules:
StartTempAdjustment table
CREATE TABLE starttempadjustment (
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
polProcessID int(11) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
opModeID smallint(6) NOT NULL DEFAULT '0',
tempAdjustTermA float DEFAULT NULL,
tempAdjustTermACV float DEFAULT NULL,
tempAdjustTermB float DEFAULT NULL,
tempAdjustTermBCV float DEFAULT NULL,
tempAdjustTermC float DEFAULT NULL,
tempAdjustTermCCV float DEFAULT NULL,
startTempEquationType varchar(4) DEFAULT '',
PRIMARY KEY (fuelTypeID,polProcessID,modelYearGroupID,opModeID),
KEY fuelTypeID (fuelTypeID),
KEY polProcessID (polProcessID),
KEY modelYearGroupID (modelYearGroupID),
KEY opModeID (opModeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The StartTempAdjustment is used by these modules:
State table
CREATE TABLE state (
stateID smallint(6) NOT NULL DEFAULT '0',
stateName char(25) DEFAULT NULL,
stateAbbr char(2) DEFAULT NULL,
PRIMARY KEY (stateID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
SulfateEmissionRate table
CREATE TABLE sulfateemissionrate (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
modelYearGroupID int(11) NOT NULL DEFAULT '0',
meanBaseRate float DEFAULT NULL,
meanBaseRateCV float DEFAULT NULL,
dataSourceID smallint(6) DEFAULT NULL,
PRIMARY KEY (polProcessID,fuelTypeID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SulfateEmissionRate is used by these modules:
SulfateFractions table
CREATE TABLE sulfatefractions (
processID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
minModelYearID smallint(6) NOT NULL,
maxModelYearID smallint(6) NOT NULL,
SulfatenonECPMFraction double NOT NULL,
H2OnonECPMFraction double NOT NULL,
BaseFuelSulfurLevel double NOT NULL,
BaseFuelSulfateFraction double NOT NULL,
DataSourceId smallint(6) NOT NULL DEFAULT '0',
PRIMARY KEY (processID,fuelTypeID,sourceTypeID,minModelYearID,maxModelYearID),
KEY processID (processID,sourceTypeID,fuelTypeID,minModelYearID,maxModelYearID),
KEY processID_2 (processID,minModelYearID,maxModelYearID,fuelTypeID,sourceTypeID),
KEY processID_3 (processID,minModelYearID,maxModelYearID,sourceTypeID,fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The SulfateFractions is used by these modules:
SulfurBase table
CREATE TABLE sulfurbase (
modelYearGroupID int(11) NOT NULL DEFAULT '0',
sulfurBase float DEFAULT NULL,
sulfurBasis float DEFAULT '30',
sulfurGPAMax float DEFAULT '330',
PRIMARY KEY (modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
sulfurCapAmount table
CREATE TABLE sulfurcapamount (
fuelTypeID smallint(6) NOT NULL,
sulfurCap double DEFAULT NULL,
PRIMARY KEY (fuelTypeID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
SulfurModelCoeff table
CREATE TABLE sulfurmodelcoeff (
processID smallint(6) NOT NULL,
pollutantID smallint(6) NOT NULL,
M6emitterID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
fuelMYGroupID int(8) NOT NULL,
sulfurFunctionID smallint(6) NOT NULL,
sulfurCoeff float DEFAULT NULL,
lowSulfurCoeff double DEFAULT NULL,
PRIMARY KEY (processID,pollutantID,M6emitterID,sourceTypeID,fuelMYGroupID,sulfurFunctionID),
KEY processID (processID,pollutantID,M6emitterID,sourceTypeID,fuelMYGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
SulfurModelName table
CREATE TABLE sulfurmodelname (
M6EmitterID smallint(6) NOT NULL DEFAULT '0',
sulfurFunctionID smallint(6) NOT NULL DEFAULT '0',
M6emitterName char(10) DEFAULT NULL,
sulfurFunctionName char(10) DEFAULT NULL,
PRIMARY KEY (M6EmitterID,sulfurFunctionID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
TankTemperatureGroup table
CREATE TABLE tanktemperaturegroup (
tankTemperatureGroupID smallint(6) NOT NULL DEFAULT '0',
tankTemperatureGroupName char(50) NOT NULL DEFAULT '',
PRIMARY KEY (tankTemperatureGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
TankTemperatureRise table
CREATE TABLE tanktemperaturerise (
tankTemperatureGroupID smallint(6) NOT NULL DEFAULT '0',
tankTemperatureRiseTermA float DEFAULT NULL,
tankTemperatureRiseTermACV float DEFAULT NULL,
tankTemperatureRiseTermB float DEFAULT NULL,
tankTemperatureRiseTermBCV float DEFAULT NULL,
PRIMARY KEY (tankTemperatureGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The TankTemperatureRise is used by these modules:
TankVaporGenCoeffs table
CREATE TABLE tankvaporgencoeffs (
ethanolLevelID smallint(6) NOT NULL DEFAULT '0',
altitude char(1) NOT NULL DEFAULT '',
tvgTermA float DEFAULT NULL,
tvgTermB float DEFAULT NULL,
tvgTermC float DEFAULT NULL,
PRIMARY KEY (ethanolLevelID,altitude)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The TankVaporGenCoeffs is used by these modules:
TemperatureAdjustment table
CREATE TABLE temperatureadjustment (
polProcessID int(11) NOT NULL DEFAULT '0',
fuelTypeID smallint(6) NOT NULL DEFAULT '0',
tempAdjustTermA float DEFAULT NULL,
tempAdjustTermACV float DEFAULT NULL,
tempAdjustTermB float DEFAULT NULL,
tempAdjustTermBCV float DEFAULT NULL,
tempAdjustTermC float DEFAULT NULL,
tempAdjustTermCCV float DEFAULT NULL,
minModelYearID smallint(6) NOT NULL DEFAULT '1960',
maxModelYearID smallint(6) NOT NULL DEFAULT '2050',
PRIMARY KEY (polProcessID,fuelTypeID,minModelYearID,maxModelYearID),
KEY polProcessID (polProcessID),
KEY fuelTypeID (fuelTypeID),
KEY polProcessID_2 (polProcessID),
KEY fuelTypeID_2 (fuelTypeID),
KEY fuelTypeID_3 (fuelTypeID,polProcessID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The TemperatureAdjustment is used by these modules:
temperatureFactorExpression table
CREATE TABLE temperaturefactorexpression (
processID smallint(6) NOT NULL,
pollutantID smallint(6) NOT NULL,
fuelTypeID smallint(6) NOT NULL,
sourceTypeID smallint(6) NOT NULL,
minModelYearID smallint(6) NOT NULL,
maxModelYearID smallint(6) NOT NULL,
tempCorrectionExpression varchar(5000) DEFAULT NULL,
PRIMARY KEY (processID,pollutantID,fuelTypeID,sourceTypeID,minModelYearID,maxModelYearID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The temperatureFactorExpression is used by these modules:
TemperatureProfileID table
CREATE TABLE temperatureprofileid (
temperatureProfileID bigint(20) NOT NULL,
zoneID int(11) NOT NULL,
monthID smallint(6) NOT NULL,
PRIMARY KEY (temperatureProfileID),
KEY zoneID (zoneID,monthID,temperatureProfileID),
KEY monthID (monthID,zoneID,temperatureProfileID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
togSpeciation table
CREATE TABLE togspeciation (
fuelSubtypeID smallint(6) NOT NULL,
regClassID smallint(6) NOT NULL,
processID smallint(6) NOT NULL,
modelYearGroupID int(11) NOT NULL,
togSpeciationProfileID varchar(10) NOT NULL DEFAULT '0',
PRIMARY KEY (fuelSubtypeID,regClassID,processID,modelYearGroupID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The togSpeciation is used by these modules:
TOGSpeciationProfile table
CREATE TABLE togspeciationprofile (
mechanismID smallint(6) NOT NULL,
togSpeciationProfileID varchar(10) NOT NULL DEFAULT '0',
integratedSpeciesSetID smallint(6) NOT NULL,
pollutantID smallint(6) NOT NULL,
lumpedSpeciesName varchar(20) NOT NULL,
TOGSpeciationDivisor double DEFAULT NULL,
TOGSpeciationMassFraction double DEFAULT NULL,
PRIMARY KEY (mechanismID,togSpeciationProfileID,integratedSpeciesSetID,pollutantID,lumpedSpeciesName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The TOGSpeciationProfile is used by these modules:
TOGSpeciationProfileName table
CREATE TABLE togspeciationprofilename (
togSpeciationProfileID varchar(10) NOT NULL DEFAULT '0',
TOGSpeciationProfileName varchar(100) DEFAULT NULL,
dataSourceId smallint(6) DEFAULT NULL,
PRIMARY KEY (togSpeciationProfileID),
KEY TOGSpeciationProfileName (TOGSpeciationProfileName)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
WeightClass table
CREATE TABLE weightclass (
weightClassID smallint(6) NOT NULL DEFAULT '0',
weightClassName char(50) DEFAULT NULL,
midpointWeight float DEFAULT NULL,
PRIMARY KEY (weightClassID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
Year table
CREATE TABLE year (
yearID smallint(6) NOT NULL DEFAULT '0',
isBaseYear char(1) DEFAULT NULL,
fuelYearID int(11) NOT NULL DEFAULT '0',
PRIMARY KEY (yearID),
KEY isBaseYear (isBaseYear)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The Year is used by these modules:
Zone table
CREATE TABLE zone (
zoneID int(11) NOT NULL DEFAULT '0',
countyID int(11) NOT NULL DEFAULT '0',
idleAllocFactor double DEFAULT NULL,
SHPAllocFactor double DEFAULT NULL,
PRIMARY KEY (zoneID),
KEY countyID (countyID),
KEY zoneID (zoneID,countyID),
KEY countyID_2 (countyID,zoneID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The Zone is used by these modules:
ZoneMonthHour table
CREATE TABLE zonemonthhour (
monthID smallint(6) NOT NULL DEFAULT '0',
zoneID int(11) NOT NULL DEFAULT '0',
hourID smallint(6) NOT NULL DEFAULT '0',
temperature float DEFAULT NULL,
temperatureCV float DEFAULT NULL,
relHumidity float DEFAULT NULL,
heatIndex float DEFAULT NULL,
specificHumidity float DEFAULT NULL,
relativeHumidityCV float DEFAULT NULL,
PRIMARY KEY (hourID,monthID,zoneID),
KEY monthID (monthID),
KEY zoneID (zoneID),
KEY hourID (hourID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ZoneMonthHour is used by these modules:
ZoneRoadType table
CREATE TABLE zoneroadtype (
zoneID int(11) NOT NULL DEFAULT '0',
roadTypeID smallint(6) NOT NULL DEFAULT '0',
SHOAllocFactor double DEFAULT NULL,
PRIMARY KEY (roadTypeID,zoneID),
KEY roadTypeID (roadTypeID,zoneID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1
The ZoneRoadType is used by these modules:
Pollutants and Modules Cross Reference
| Pollutant | Process | Module |
|---|
| Benzene (20) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzene (20) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzene (20) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzene (20) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzene (20) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| Benzene (20) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| Benzene (20) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| Benzene (20) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| Benzene (20) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| Benzene (20) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| Benzene (20) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| Benzene (20) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Ethanol (21) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Ethanol (21) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Ethanol (21) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Ethanol (21) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Ethanol (21) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| Ethanol (21) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| Ethanol (21) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| Ethanol (21) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| Ethanol (21) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| Ethanol (21) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| Ethanol (21) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| Ethanol (21) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| MTBE (22) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| MTBE (22) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| MTBE (22) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| MTBE (22) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| MTBE (22) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| MTBE (22) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| MTBE (22) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| MTBE (22) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| MTBE (22) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| MTBE (22) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| MTBE (22) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| MTBE (22) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Naphthalene particle (23) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Naphthalene particle (23) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| 1,3-Butadiene (24) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| 1,3-Butadiene (24) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Formaldehyde (25) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Formaldehyde (25) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Acetaldehyde (26) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Acetaldehyde (26) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Acrolein (27) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Acrolein (27) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| 2,2,4-Trimethylpentane (40) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| 2,2,4-Trimethylpentane (40) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Ethyl Benzene (41) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Ethyl Benzene (41) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Ethyl Benzene (41) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Ethyl Benzene (41) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| Ethyl Benzene (41) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Hexane (42) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Hexane (42) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Hexane (42) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Hexane (42) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Hexane (42) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| Hexane (42) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| Hexane (42) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| Hexane (42) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| Hexane (42) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| Hexane (42) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| Hexane (42) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| Hexane (42) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Propionaldehyde (43) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Propionaldehyde (43) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Styrene (44) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Styrene (44) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Toluene (45) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Toluene (45) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Toluene (45) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Toluene (45) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Toluene (45) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| Toluene (45) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| Toluene (45) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| Toluene (45) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| Toluene (45) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| Toluene (45) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| Toluene (45) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| Toluene (45) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Xylene (46) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Xylene (46) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Xylene (46) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Xylene (46) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Xylene (46) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| Xylene (46) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| Xylene (46) | Evap RecMar Neck Hose Permeation (22) |
Nonroad Air toxics Calculator |
| Xylene (46) | Evap RecMar Supply/Ret Hose Permeation (23) |
Nonroad Air toxics Calculator |
| Xylene (46) | Evap RecMar Vent Hose Permeation (24) |
Nonroad Air toxics Calculator |
| Xylene (46) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| Xylene (46) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| Xylene (46) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| Mercury Elemental Gaseous (60) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Mercury Divalent Gaseous (61) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Mercury Particulate (62) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Arsenic Compounds (63) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Chromium 6+ (65) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Manganese Compounds (66) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Nickel Compounds (67) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Dibenzo(a,h)anthracene particle (68) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Dibenzo(a,h)anthracene particle (68) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Fluoranthene particle (69) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Fluoranthene particle (69) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Acenaphthene particle (70) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Acenaphthene particle (70) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Acenaphthylene particle (71) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Acenaphthylene particle (71) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Anthracene particle (72) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Anthracene particle (72) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benz(a)anthracene particle (73) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benz(a)anthracene particle (73) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(a)pyrene particle (74) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(a)pyrene particle (74) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(b)fluoranthene particle (75) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(b)fluoranthene particle (75) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(g,h,i)perylene particle (76) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(g,h,i)perylene particle (76) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(k)fluoranthene particle (77) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(k)fluoranthene particle (77) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Chrysene particle (78) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Chrysene particle (78) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Fluorene particle (81) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Fluorene particle (81) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Indeno(1,2,3,c,d)pyrene particle (82) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Indeno(1,2,3,c,d)pyrene particle (82) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Phenanthrene particle (83) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Phenanthrene particle (83) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Pyrene particle (84) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Pyrene particle (84) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| NonHAPTOG (88) | Running Exhaust (1) |
Nonroad Air toxics Calculator TOG Speciation Calculator |
| NonHAPTOG (88) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator TOG Speciation Calculator |
| NonHAPTOG (88) | Refueling Displacement Vapor Loss (18) |
Nonroad Air toxics Calculator TOG Speciation Calculator |
| NonHAPTOG (88) | Refueling Spillage Loss (19) |
Nonroad Air toxics Calculator TOG Speciation Calculator |
| NonHAPTOG (88) | Evap Tank Permeation (20) |
Nonroad Air toxics Calculator |
| NonHAPTOG (88) | Evap Hose Permeation (21) |
Nonroad Air toxics Calculator |
| NonHAPTOG (88) | Diurnal Fuel Vapor Venting (30) |
Nonroad Air toxics Calculator |
| NonHAPTOG (88) | HotSoak Fuel Vapor Venting (31) |
Nonroad Air toxics Calculator |
| NonHAPTOG (88) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Air toxics Calculator |
| 1,2,3,7,8,9-Hexachlorodibenzo-p-Dioxin (130) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Octachlorodibenzo-p-dioxin (131) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,4,6,7,8-Heptachlorodibenzo-p-Dioxin (132) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Octachlorodibenzofuran (133) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,4,7,8-Hexachlorodibenzo-p-Dioxin (134) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,7,8-Pentachlorodibenzo-p-Dioxin (135) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 2,3,7,8-Tetrachlorodibenzofuran (136) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,4,7,8,9-Heptachlorodibenzofuran (137) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 2,3,4,7,8-Pentachlorodibenzofuran (138) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,7,8-Pentachlorodibenzofuran (139) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,6,7,8-Hexachlorodibenzofuran (140) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,6,7,8-Hexachlorodibenzo-p-Dioxin (141) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 2,3,7,8-Tetrachlorodibenzo-p-Dioxin (142) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 2,3,4,6,7,8-Hexachlorodibenzofuran (143) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,4,6,7,8-Heptachlorodibenzofuran (144) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,4,7,8-Hexachlorodibenzofuran (145) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| 1,2,3,7,8,9-Hexachlorodibenzofuran (146) | Running Exhaust (1) |
Nonroad Air toxics Calculator BaseRateCalculator |
| Dibenzo(a,h)anthracene gas (168) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Dibenzo(a,h)anthracene gas (168) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Fluoranthene gas (169) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Fluoranthene gas (169) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Acenaphthene gas (170) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Acenaphthene gas (170) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Acenaphthylene gas (171) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Acenaphthylene gas (171) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Anthracene gas (172) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Anthracene gas (172) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benz(a)anthracene gas (173) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benz(a)anthracene gas (173) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(a)pyrene gas (174) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(a)pyrene gas (174) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(b)fluoranthene gas (175) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(b)fluoranthene gas (175) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(g,h,i)perylene gas (176) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(g,h,i)perylene gas (176) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Benzo(k)fluoranthene gas (177) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Benzo(k)fluoranthene gas (177) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Chrysene gas (178) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Chrysene gas (178) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Fluorene gas (181) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Fluorene gas (181) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Phenanthrene gas (183) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Phenanthrene gas (183) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Pyrene gas (184) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Pyrene gas (184) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Naphthalene gas (185) | Running Exhaust (1) |
Nonroad Air toxics Calculator Air toxics Calculator |
| Naphthalene gas (185) | Crankcase Running Exhaust (15) |
Nonroad Air toxics Calculator Crankcase Emission Calculator |
| Methane (CH4) (5) | Running Exhaust (1) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Methane (CH4) (5) | Crankcase Running Exhaust (15) |
Nonroad HC Speciation Calculator Crankcase Emission Calculator |
| Methane (CH4) (5) | Refueling Displacement Vapor Loss (18) |
Nonroad HC Speciation Calculator |
| Methane (CH4) (5) | Refueling Spillage Loss (19) |
Nonroad HC Speciation Calculator |
| Methane (CH4) (5) | Evap Tank Permeation (20) |
Nonroad HC Speciation Calculator |
| Methane (CH4) (5) | Evap Hose Permeation (21) |
Nonroad HC Speciation Calculator |
| Methane (CH4) (5) | Diurnal Fuel Vapor Venting (30) |
Nonroad HC Speciation Calculator |
| Methane (CH4) (5) | HotSoak Fuel Vapor Venting (31) |
Nonroad HC Speciation Calculator |
| Methane (CH4) (5) | RunningLoss Fuel Vapor Venting (32) |
Nonroad HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Running Exhaust (1) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Crankcase Running Exhaust (15) |
Nonroad HC Speciation Calculator Crankcase Emission Calculator |
| Non-Methane Hydrocarbons (79) | Refueling Displacement Vapor Loss (18) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Refueling Spillage Loss (19) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Evap Tank Permeation (20) |
Nonroad HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Evap Hose Permeation (21) |
Nonroad HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Diurnal Fuel Vapor Venting (30) |
Nonroad HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | HotSoak Fuel Vapor Venting (31) |
Nonroad HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | RunningLoss Fuel Vapor Venting (32) |
Nonroad HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Running Exhaust (1) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Crankcase Running Exhaust (15) |
Nonroad HC Speciation Calculator Crankcase Emission Calculator |
| Non-Methane Organic Gases (80) | Refueling Displacement Vapor Loss (18) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Refueling Spillage Loss (19) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Evap Tank Permeation (20) |
Nonroad HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Evap Hose Permeation (21) |
Nonroad HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Diurnal Fuel Vapor Venting (30) |
Nonroad HC Speciation Calculator |
| Non-Methane Organic Gases (80) | HotSoak Fuel Vapor Venting (31) |
Nonroad HC Speciation Calculator |
| Non-Methane Organic Gases (80) | RunningLoss Fuel Vapor Venting (32) |
Nonroad HC Speciation Calculator |
| Total Organic Gases (86) | Running Exhaust (1) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Total Organic Gases (86) | Crankcase Running Exhaust (15) |
Nonroad HC Speciation Calculator Crankcase Emission Calculator |
| Total Organic Gases (86) | Refueling Displacement Vapor Loss (18) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Total Organic Gases (86) | Refueling Spillage Loss (19) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Total Organic Gases (86) | Evap Tank Permeation (20) |
Nonroad HC Speciation Calculator |
| Total Organic Gases (86) | Evap Hose Permeation (21) |
Nonroad HC Speciation Calculator |
| Total Organic Gases (86) | Diurnal Fuel Vapor Venting (30) |
Nonroad HC Speciation Calculator |
| Total Organic Gases (86) | HotSoak Fuel Vapor Venting (31) |
Nonroad HC Speciation Calculator |
| Total Organic Gases (86) | RunningLoss Fuel Vapor Venting (32) |
Nonroad HC Speciation Calculator |
| Volatile Organic Compounds (87) | Running Exhaust (1) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Volatile Organic Compounds (87) | Crankcase Running Exhaust (15) |
Nonroad HC Speciation Calculator Crankcase Emission Calculator |
| Volatile Organic Compounds (87) | Refueling Displacement Vapor Loss (18) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Volatile Organic Compounds (87) | Refueling Spillage Loss (19) |
Nonroad HC Speciation Calculator HC Speciation Calculator |
| Volatile Organic Compounds (87) | Evap Tank Permeation (20) |
Nonroad HC Speciation Calculator |
| Volatile Organic Compounds (87) | Evap Hose Permeation (21) |
Nonroad HC Speciation Calculator |
| Volatile Organic Compounds (87) | Diurnal Fuel Vapor Venting (30) |
Nonroad HC Speciation Calculator |
| Volatile Organic Compounds (87) | HotSoak Fuel Vapor Venting (31) |
Nonroad HC Speciation Calculator |
| Volatile Organic Compounds (87) | RunningLoss Fuel Vapor Venting (32) |
Nonroad HC Speciation Calculator |
| Total Gaseous Hydrocarbons (1) | HotSoak Fuel Vapor Venting (31) |
Nonroad Calculator |
| Total Gaseous Hydrocarbons (1) | Diurnal Fuel Vapor Venting (30) |
Nonroad Calculator |
| Total Gaseous Hydrocarbons (1) | Refueling Displacement Vapor Loss (18) |
Nonroad Calculator Refueling Loss Calculator |
| Total Gaseous Hydrocarbons (1) | Refueling Spillage Loss (19) |
Nonroad Calculator Refueling Loss Calculator |
| Total Gaseous Hydrocarbons (1) | RunningLoss Fuel Vapor Venting (32) |
Nonroad Calculator |
| Total Gaseous Hydrocarbons (1) | Evap Tank Permeation (20) |
Nonroad Calculator |
| Total Gaseous Hydrocarbons (1) | Evap Hose Permeation (21) |
Nonroad Calculator |
| Atmospheric CO2 (90) | Running Exhaust (1) |
Nonroad Calculator CO2AERunningStartExtendedIdleCalculator |
| Total Energy Consumption (91) | Running Exhaust (1) |
Nonroad Calculator BaseRateCalculator |
| Brake Specific Fuel Consumption (BSFC) (99) | Running Exhaust (1) |
Nonroad Calculator |
| Total Gaseous Hydrocarbons (1) | Running Exhaust (1) |
Nonroad Calculator BaseRateCalculator |
| Carbon Monoxide (CO) (2) | Running Exhaust (1) |
Nonroad Calculator BaseRateCalculator |
| Oxides of Nitrogen (NOx) (3) | Running Exhaust (1) |
Nonroad Calculator BaseRateCalculator |
| Ammonia (NH3) (30) | Running Exhaust (1) |
Nonroad Calculator BaseRateCalculator |
| Sulfur Dioxide (SO2) (31) | Running Exhaust (1) |
Nonroad Calculator SO2 Calculator |
| Primary Exhaust PM10 - Total (100) | Running Exhaust (1) |
Nonroad Calculator PM10 Emission Calculator |
| Primary Exhaust PM2.5 - Total (110) | Running Exhaust (1) |
Nonroad Calculator Sulfate PM Calculator |
| Total Gaseous Hydrocarbons (1) | Crankcase Running Exhaust (15) |
Nonroad Calculator Crankcase Emission Calculator |
| Benzene (20) | Start Exhaust (2) |
Air toxics Calculator |
| Benzene (20) | Evap Permeation (11) |
Air toxics Calculator |
| Benzene (20) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Benzene (20) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Benzene (20) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Benzene (20) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Ethanol (21) | Start Exhaust (2) |
Air toxics Calculator |
| Ethanol (21) | Evap Permeation (11) |
Air toxics Calculator |
| Ethanol (21) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Ethanol (21) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| MTBE (22) | Start Exhaust (2) |
Air toxics Calculator |
| MTBE (22) | Evap Permeation (11) |
Air toxics Calculator |
| MTBE (22) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| MTBE (22) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Naphthalene particle (23) | Start Exhaust (2) |
Air toxics Calculator |
| Naphthalene particle (23) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Naphthalene particle (23) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| 1,3-Butadiene (24) | Start Exhaust (2) |
Air toxics Calculator |
| 1,3-Butadiene (24) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| 1,3-Butadiene (24) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Formaldehyde (25) | Start Exhaust (2) |
Air toxics Calculator |
| Formaldehyde (25) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Formaldehyde (25) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Acetaldehyde (26) | Start Exhaust (2) |
Air toxics Calculator |
| Acetaldehyde (26) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Acetaldehyde (26) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Acrolein (27) | Start Exhaust (2) |
Air toxics Calculator |
| Acrolein (27) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Acrolein (27) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Start Exhaust (2) |
Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap Permeation (11) |
Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| 2,2,4-Trimethylpentane (40) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Ethyl Benzene (41) | Start Exhaust (2) |
Air toxics Calculator |
| Ethyl Benzene (41) | Evap Permeation (11) |
Air toxics Calculator |
| Ethyl Benzene (41) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Ethyl Benzene (41) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Ethyl Benzene (41) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Ethyl Benzene (41) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Hexane (42) | Start Exhaust (2) |
Air toxics Calculator |
| Hexane (42) | Evap Permeation (11) |
Air toxics Calculator |
| Hexane (42) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Hexane (42) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Hexane (42) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Hexane (42) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Propionaldehyde (43) | Start Exhaust (2) |
Air toxics Calculator |
| Propionaldehyde (43) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Propionaldehyde (43) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Styrene (44) | Start Exhaust (2) |
Air toxics Calculator |
| Styrene (44) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Styrene (44) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Toluene (45) | Start Exhaust (2) |
Air toxics Calculator |
| Toluene (45) | Evap Permeation (11) |
Air toxics Calculator |
| Toluene (45) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Toluene (45) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Toluene (45) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Toluene (45) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Xylene (46) | Start Exhaust (2) |
Air toxics Calculator |
| Xylene (46) | Evap Permeation (11) |
Air toxics Calculator |
| Xylene (46) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Xylene (46) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Xylene (46) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Xylene (46) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Dibenzo(a,h)anthracene particle (68) | Start Exhaust (2) |
Air toxics Calculator |
| Fluoranthene particle (69) | Start Exhaust (2) |
Air toxics Calculator |
| Acenaphthene particle (70) | Start Exhaust (2) |
Air toxics Calculator |
| Acenaphthylene particle (71) | Start Exhaust (2) |
Air toxics Calculator |
| Anthracene particle (72) | Start Exhaust (2) |
Air toxics Calculator |
| Benz(a)anthracene particle (73) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(a)pyrene particle (74) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(b)fluoranthene particle (75) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(g,h,i)perylene particle (76) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(k)fluoranthene particle (77) | Start Exhaust (2) |
Air toxics Calculator |
| Chrysene particle (78) | Start Exhaust (2) |
Air toxics Calculator |
| Fluorene particle (81) | Start Exhaust (2) |
Air toxics Calculator |
| Indeno(1,2,3,c,d)pyrene particle (82) | Start Exhaust (2) |
Air toxics Calculator |
| Phenanthrene particle (83) | Start Exhaust (2) |
Air toxics Calculator |
| Pyrene particle (84) | Start Exhaust (2) |
Air toxics Calculator |
| Dibenzo(a,h)anthracene gas (168) | Start Exhaust (2) |
Air toxics Calculator |
| Dibenzo(a,h)anthracene gas (168) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Dibenzo(a,h)anthracene gas (168) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Fluoranthene gas (169) | Start Exhaust (2) |
Air toxics Calculator |
| Fluoranthene gas (169) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Fluoranthene gas (169) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Acenaphthene gas (170) | Start Exhaust (2) |
Air toxics Calculator |
| Acenaphthene gas (170) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Acenaphthene gas (170) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Acenaphthylene gas (171) | Start Exhaust (2) |
Air toxics Calculator |
| Acenaphthylene gas (171) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Acenaphthylene gas (171) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Anthracene gas (172) | Start Exhaust (2) |
Air toxics Calculator |
| Anthracene gas (172) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Anthracene gas (172) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Benz(a)anthracene gas (173) | Start Exhaust (2) |
Air toxics Calculator |
| Benz(a)anthracene gas (173) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Benz(a)anthracene gas (173) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Benzo(a)pyrene gas (174) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(a)pyrene gas (174) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Benzo(a)pyrene gas (174) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Benzo(b)fluoranthene gas (175) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(b)fluoranthene gas (175) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Benzo(b)fluoranthene gas (175) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Benzo(g,h,i)perylene gas (176) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(g,h,i)perylene gas (176) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Benzo(g,h,i)perylene gas (176) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Benzo(k)fluoranthene gas (177) | Start Exhaust (2) |
Air toxics Calculator |
| Benzo(k)fluoranthene gas (177) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Benzo(k)fluoranthene gas (177) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Chrysene gas (178) | Start Exhaust (2) |
Air toxics Calculator |
| Chrysene gas (178) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Chrysene gas (178) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Fluorene gas (181) | Start Exhaust (2) |
Air toxics Calculator |
| Fluorene gas (181) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Fluorene gas (181) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Start Exhaust (2) |
Air toxics Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Phenanthrene gas (183) | Start Exhaust (2) |
Air toxics Calculator |
| Phenanthrene gas (183) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Phenanthrene gas (183) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Pyrene gas (184) | Start Exhaust (2) |
Air toxics Calculator |
| Pyrene gas (184) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Pyrene gas (184) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Naphthalene gas (185) | Start Exhaust (2) |
Air toxics Calculator |
| Naphthalene gas (185) | Evap Permeation (11) |
Air toxics Calculator |
| Naphthalene gas (185) | Evap Fuel Vapor Venting (12) |
Air toxics Calculator |
| Naphthalene gas (185) | Evap Fuel Leaks (13) |
Air toxics Calculator |
| Naphthalene gas (185) | Refueling Displacement Vapor Loss (18) |
Air toxics Calculator |
| Naphthalene gas (185) | Refueling Spillage Loss (19) |
Air toxics Calculator |
| Naphthalene gas (185) | Extended Idle Exhaust (90) |
Air toxics Calculator |
| Naphthalene gas (185) | Auxiliary Power Exhaust (91) |
Air toxics Calculator |
| Total Gaseous Hydrocarbons (1) | Start Exhaust (2) |
BaseRateCalculator |
| Total Gaseous Hydrocarbons (1) | Brakewear (9) |
BaseRateCalculator |
| Total Gaseous Hydrocarbons (1) | Tirewear (10) |
BaseRateCalculator |
| Total Gaseous Hydrocarbons (1) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Total Gaseous Hydrocarbons (1) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Carbon Monoxide (CO) (2) | Start Exhaust (2) |
BaseRateCalculator |
| Carbon Monoxide (CO) (2) | Brakewear (9) |
BaseRateCalculator |
| Carbon Monoxide (CO) (2) | Tirewear (10) |
BaseRateCalculator |
| Carbon Monoxide (CO) (2) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Carbon Monoxide (CO) (2) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Oxides of Nitrogen (NOx) (3) | Start Exhaust (2) |
BaseRateCalculator |
| Oxides of Nitrogen (NOx) (3) | Brakewear (9) |
BaseRateCalculator |
| Oxides of Nitrogen (NOx) (3) | Tirewear (10) |
BaseRateCalculator |
| Oxides of Nitrogen (NOx) (3) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Oxides of Nitrogen (NOx) (3) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Nitrous Oxide (N2O) (6) | Running Exhaust (1) |
BaseRateCalculator |
| Nitrous Oxide (N2O) (6) | Start Exhaust (2) |
BaseRateCalculator |
| Nitrous Oxide (N2O) (6) | Brakewear (9) |
BaseRateCalculator |
| Nitrous Oxide (N2O) (6) | Tirewear (10) |
BaseRateCalculator |
| Nitrous Oxide (N2O) (6) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Nitrous Oxide (N2O) (6) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Ammonia (NH3) (30) | Start Exhaust (2) |
BaseRateCalculator |
| Ammonia (NH3) (30) | Brakewear (9) |
BaseRateCalculator |
| Ammonia (NH3) (30) | Tirewear (10) |
BaseRateCalculator |
| Ammonia (NH3) (30) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Ammonia (NH3) (30) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Total Energy Consumption (91) | Start Exhaust (2) |
BaseRateCalculator |
| Total Energy Consumption (91) | Brakewear (9) |
BaseRateCalculator |
| Total Energy Consumption (91) | Tirewear (10) |
BaseRateCalculator |
| Total Energy Consumption (91) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Total Energy Consumption (91) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Composite - NonECPM (118) | Running Exhaust (1) |
BaseRateCalculator Sulfate PM Calculator |
| Composite - NonECPM (118) | Start Exhaust (2) |
BaseRateCalculator Sulfate PM Calculator |
| Composite - NonECPM (118) | Brakewear (9) |
BaseRateCalculator |
| Composite - NonECPM (118) | Tirewear (10) |
BaseRateCalculator |
| Composite - NonECPM (118) | Extended Idle Exhaust (90) |
BaseRateCalculator Sulfate PM Calculator |
| Composite - NonECPM (118) | Auxiliary Power Exhaust (91) |
BaseRateCalculator Sulfate PM Calculator |
| Elemental Carbon (112) | Running Exhaust (1) |
BaseRateCalculator Sulfate PM Calculator |
| Elemental Carbon (112) | Start Exhaust (2) |
BaseRateCalculator Sulfate PM Calculator |
| Elemental Carbon (112) | Brakewear (9) |
BaseRateCalculator |
| Elemental Carbon (112) | Tirewear (10) |
BaseRateCalculator |
| Elemental Carbon (112) | Extended Idle Exhaust (90) |
BaseRateCalculator Sulfate PM Calculator |
| Elemental Carbon (112) | Auxiliary Power Exhaust (91) |
BaseRateCalculator Sulfate PM Calculator |
| Primary PM2.5 - Brakewear Particulate (116) | Running Exhaust (1) |
BaseRateCalculator |
| Primary PM2.5 - Brakewear Particulate (116) | Start Exhaust (2) |
BaseRateCalculator |
| Primary PM2.5 - Brakewear Particulate (116) | Brakewear (9) |
BaseRateCalculator |
| Primary PM2.5 - Brakewear Particulate (116) | Tirewear (10) |
BaseRateCalculator |
| Primary PM2.5 - Brakewear Particulate (116) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Primary PM2.5 - Brakewear Particulate (116) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Primary PM2.5 - Tirewear Particulate (117) | Running Exhaust (1) |
BaseRateCalculator |
| Primary PM2.5 - Tirewear Particulate (117) | Start Exhaust (2) |
BaseRateCalculator |
| Primary PM2.5 - Tirewear Particulate (117) | Brakewear (9) |
BaseRateCalculator |
| Primary PM2.5 - Tirewear Particulate (117) | Tirewear (10) |
BaseRateCalculator |
| Primary PM2.5 - Tirewear Particulate (117) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Primary PM2.5 - Tirewear Particulate (117) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Petroleum Energy Consumption (92) | Running Exhaust (1) |
BaseRateCalculator |
| Petroleum Energy Consumption (92) | Start Exhaust (2) |
BaseRateCalculator |
| Petroleum Energy Consumption (92) | Brakewear (9) |
BaseRateCalculator |
| Petroleum Energy Consumption (92) | Tirewear (10) |
BaseRateCalculator |
| Petroleum Energy Consumption (92) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Petroleum Energy Consumption (92) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| Fossil Fuel Energy Consumption (93) | Running Exhaust (1) |
BaseRateCalculator |
| Fossil Fuel Energy Consumption (93) | Start Exhaust (2) |
BaseRateCalculator |
| Fossil Fuel Energy Consumption (93) | Brakewear (9) |
BaseRateCalculator |
| Fossil Fuel Energy Consumption (93) | Tirewear (10) |
BaseRateCalculator |
| Fossil Fuel Energy Consumption (93) | Extended Idle Exhaust (90) |
BaseRateCalculator |
| Fossil Fuel Energy Consumption (93) | Auxiliary Power Exhaust (91) |
BaseRateCalculator |
| CO2 Equivalent (98) | Running Exhaust (1) |
CO2AERunningStartExtendedIdleCalculator |
| Atmospheric CO2 (90) | Start Exhaust (2) |
CO2AERunningStartExtendedIdleCalculator |
| CO2 Equivalent (98) | Start Exhaust (2) |
CO2AERunningStartExtendedIdleCalculator |
| Atmospheric CO2 (90) | Extended Idle Exhaust (90) |
CO2AERunningStartExtendedIdleCalculator |
| CO2 Equivalent (98) | Extended Idle Exhaust (90) |
CO2AERunningStartExtendedIdleCalculator |
| Atmospheric CO2 (90) | Auxiliary Power Exhaust (91) |
CO2AERunningStartExtendedIdleCalculator |
| CO2 Equivalent (98) | Auxiliary Power Exhaust (91) |
CO2AERunningStartExtendedIdleCalculator |
| Carbon Monoxide (CO) (2) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Oxides of Nitrogen (NOx) (3) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Nitrous Oxide (N2O) (6) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Ammonia (NH3) (30) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Sulfur Dioxide (SO2) (31) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Nitrogen Oxide (NO) (32) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Nitrogen Dioxide (NO2) (33) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Nitrous Acid (HONO) (34) | Crankcase Running Exhaust (15) |
Crankcase Emission Calculator |
| Total Gaseous Hydrocarbons (1) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Carbon Monoxide (CO) (2) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Oxides of Nitrogen (NOx) (3) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Methane (CH4) (5) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Nitrous Oxide (N2O) (6) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzene (20) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Ethanol (21) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| MTBE (22) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Naphthalene particle (23) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| 1,3-Butadiene (24) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Formaldehyde (25) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Acetaldehyde (26) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Acrolein (27) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Ammonia (NH3) (30) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Sulfur Dioxide (SO2) (31) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Nitrogen Oxide (NO) (32) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Nitrogen Dioxide (NO2) (33) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Nitrous Acid (HONO) (34) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Non-Methane Hydrocarbons (79) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Non-Methane Organic Gases (80) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Total Organic Gases (86) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Volatile Organic Compounds (87) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| 2,2,4-Trimethylpentane (40) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Ethyl Benzene (41) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Hexane (42) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Propionaldehyde (43) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Styrene (44) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Toluene (45) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Xylene (46) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Dibenzo(a,h)anthracene particle (68) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Fluoranthene particle (69) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Acenaphthene particle (70) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Acenaphthylene particle (71) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Anthracene particle (72) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benz(a)anthracene particle (73) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(a)pyrene particle (74) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(b)fluoranthene particle (75) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(g,h,i)perylene particle (76) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(k)fluoranthene particle (77) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Chrysene particle (78) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Fluorene particle (81) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Indeno(1,2,3,c,d)pyrene particle (82) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Phenanthrene particle (83) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Pyrene particle (84) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Dibenzo(a,h)anthracene gas (168) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Fluoranthene gas (169) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Acenaphthene gas (170) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Acenaphthylene gas (171) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Anthracene gas (172) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benz(a)anthracene gas (173) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(a)pyrene gas (174) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(b)fluoranthene gas (175) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(g,h,i)perylene gas (176) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Benzo(k)fluoranthene gas (177) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Chrysene gas (178) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Fluorene gas (181) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Phenanthrene gas (183) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Pyrene gas (184) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Naphthalene gas (185) | Crankcase Start Exhaust (16) |
Crankcase Emission Calculator |
| Total Gaseous Hydrocarbons (1) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Carbon Monoxide (CO) (2) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Oxides of Nitrogen (NOx) (3) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Methane (CH4) (5) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Nitrous Oxide (N2O) (6) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzene (20) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Ethanol (21) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| MTBE (22) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Naphthalene particle (23) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| 1,3-Butadiene (24) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Formaldehyde (25) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Acetaldehyde (26) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Acrolein (27) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Ammonia (NH3) (30) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Sulfur Dioxide (SO2) (31) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Nitrogen Oxide (NO) (32) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Nitrogen Dioxide (NO2) (33) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Nitrous Acid (HONO) (34) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Non-Methane Hydrocarbons (79) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Non-Methane Organic Gases (80) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Total Organic Gases (86) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Volatile Organic Compounds (87) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| 2,2,4-Trimethylpentane (40) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Ethyl Benzene (41) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Hexane (42) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Propionaldehyde (43) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Styrene (44) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Toluene (45) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Xylene (46) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Dibenzo(a,h)anthracene particle (68) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Fluoranthene particle (69) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Acenaphthene particle (70) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Acenaphthylene particle (71) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Anthracene particle (72) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benz(a)anthracene particle (73) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(a)pyrene particle (74) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(b)fluoranthene particle (75) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(g,h,i)perylene particle (76) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(k)fluoranthene particle (77) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Chrysene particle (78) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Fluorene particle (81) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Indeno(1,2,3,c,d)pyrene particle (82) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Phenanthrene particle (83) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Pyrene particle (84) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Dibenzo(a,h)anthracene gas (168) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Fluoranthene gas (169) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Acenaphthene gas (170) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Acenaphthylene gas (171) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Anthracene gas (172) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benz(a)anthracene gas (173) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(a)pyrene gas (174) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(b)fluoranthene gas (175) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(g,h,i)perylene gas (176) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Benzo(k)fluoranthene gas (177) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Chrysene gas (178) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Fluorene gas (181) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Indeno(1,2,3,c,d)pyrene gas (182) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Phenanthrene gas (183) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Pyrene gas (184) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Naphthalene gas (185) | Crankcase Extended Idle Exhaust (17) |
Crankcase Emission Calculator |
| Total Gaseous Hydrocarbons (1) | Evap Permeation (11) |
Evaporative Permeation Calculator |
| Methane (CH4) (5) | Start Exhaust (2) |
HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Start Exhaust (2) |
HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Start Exhaust (2) |
HC Speciation Calculator |
| Total Organic Gases (86) | Start Exhaust (2) |
HC Speciation Calculator |
| Volatile Organic Compounds (87) | Start Exhaust (2) |
HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Evap Permeation (11) |
HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Evap Permeation (11) |
HC Speciation Calculator |
| Total Organic Gases (86) | Evap Permeation (11) |
HC Speciation Calculator |
| Volatile Organic Compounds (87) | Evap Permeation (11) |
HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Evap Fuel Vapor Venting (12) |
HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Evap Fuel Vapor Venting (12) |
HC Speciation Calculator |
| Total Organic Gases (86) | Evap Fuel Vapor Venting (12) |
HC Speciation Calculator |
| Volatile Organic Compounds (87) | Evap Fuel Vapor Venting (12) |
HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Evap Fuel Leaks (13) |
HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Evap Fuel Leaks (13) |
HC Speciation Calculator |
| Total Organic Gases (86) | Evap Fuel Leaks (13) |
HC Speciation Calculator |
| Volatile Organic Compounds (87) | Evap Fuel Leaks (13) |
HC Speciation Calculator |
| Methane (CH4) (5) | Extended Idle Exhaust (90) |
HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Extended Idle Exhaust (90) |
HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Extended Idle Exhaust (90) |
HC Speciation Calculator |
| Total Organic Gases (86) | Extended Idle Exhaust (90) |
HC Speciation Calculator |
| Volatile Organic Compounds (87) | Extended Idle Exhaust (90) |
HC Speciation Calculator |
| Methane (CH4) (5) | Auxiliary Power Exhaust (91) |
HC Speciation Calculator |
| Non-Methane Hydrocarbons (79) | Auxiliary Power Exhaust (91) |
HC Speciation Calculator |
| Non-Methane Organic Gases (80) | Auxiliary Power Exhaust (91) |
HC Speciation Calculator |
| Total Organic Gases (86) | Auxiliary Power Exhaust (91) |
HC Speciation Calculator |
| Volatile Organic Compounds (87) | Auxiliary Power Exhaust (91) |
HC Speciation Calculator |
| Total Gaseous Hydrocarbons (1) | Evap Fuel Leaks (13) |
Liquid Leaking Calculator |
| Nitrogen Dioxide (NO2) (33) | Running Exhaust (1) |
NO2 Calculator |
| Nitrogen Dioxide (NO2) (33) | Start Exhaust (2) |
NO2 Calculator |
| Nitrogen Dioxide (NO2) (33) | Extended Idle Exhaust (90) |
NO2 Calculator |
| Nitrogen Dioxide (NO2) (33) | Auxiliary Power Exhaust (91) |
NO2 Calculator |
| Nitrogen Oxide (NO) (32) | Running Exhaust (1) |
NO Calculator |
| Nitrogen Oxide (NO) (32) | Start Exhaust (2) |
NO Calculator |
| Nitrogen Oxide (NO) (32) | Extended Idle Exhaust (90) |
NO Calculator |
| Nitrogen Oxide (NO) (32) | Auxiliary Power Exhaust (91) |
NO Calculator |
| Nitrous Acid (HONO) (34) | Running Exhaust (1) |
NO Calculator |
| Nitrous Acid (HONO) (34) | Start Exhaust (2) |
NO Calculator |
| Nitrous Acid (HONO) (34) | Extended Idle Exhaust (90) |
NO Calculator |
| Nitrous Acid (HONO) (34) | Auxiliary Power Exhaust (91) |
NO Calculator |
| Primary PM10 - Brakewear Particulate (106) | Brakewear (9) |
PM10 Brake Tire Calculator |
| Primary PM10 - Tirewear Particulate (107) | Tirewear (10) |
PM10 Brake Tire Calculator |
| Primary Exhaust PM10 - Total (100) | Start Exhaust (2) |
PM10 Emission Calculator |
| Primary Exhaust PM10 - Total (100) | Extended Idle Exhaust (90) |
PM10 Emission Calculator |
| Primary Exhaust PM10 - Total (100) | Auxiliary Power Exhaust (91) |
PM10 Emission Calculator |
| Primary Exhaust PM10 - Total (100) | Crankcase Running Exhaust (15) |
PM10 Emission Calculator |
| Primary Exhaust PM10 - Total (100) | Crankcase Start Exhaust (16) |
PM10 Emission Calculator |
| Primary Exhaust PM10 - Total (100) | Crankcase Extended Idle Exhaust (17) |
PM10 Emission Calculator |
| Sulfur Dioxide (SO2) (31) | Start Exhaust (2) |
SO2 Calculator |
| Sulfur Dioxide (SO2) (31) | Extended Idle Exhaust (90) |
SO2 Calculator |
| Sulfur Dioxide (SO2) (31) | Auxiliary Power Exhaust (91) |
SO2 Calculator |
| Nitrate (NO3) (35) | Running Exhaust (1) |
Sulfate PM Calculator |
| Nitrate (NO3) (35) | Start Exhaust (2) |
Sulfate PM Calculator |
| Nitrate (NO3) (35) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Nitrate (NO3) (35) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Nitrate (NO3) (35) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Nitrate (NO3) (35) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Nitrate (NO3) (35) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Running Exhaust (1) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Start Exhaust (2) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Ammonium (NH4) (36) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Chloride (51) | Running Exhaust (1) |
Sulfate PM Calculator |
| Chloride (51) | Start Exhaust (2) |
Sulfate PM Calculator |
| Chloride (51) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Chloride (51) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Chloride (51) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Chloride (51) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Chloride (51) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Sodium (52) | Running Exhaust (1) |
Sulfate PM Calculator |
| Sodium (52) | Start Exhaust (2) |
Sulfate PM Calculator |
| Sodium (52) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Sodium (52) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Sodium (52) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Sodium (52) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Sodium (52) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Potassium (53) | Running Exhaust (1) |
Sulfate PM Calculator |
| Potassium (53) | Start Exhaust (2) |
Sulfate PM Calculator |
| Potassium (53) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Potassium (53) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Potassium (53) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Potassium (53) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Potassium (53) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Magnesium (54) | Running Exhaust (1) |
Sulfate PM Calculator |
| Magnesium (54) | Start Exhaust (2) |
Sulfate PM Calculator |
| Magnesium (54) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Magnesium (54) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Magnesium (54) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Magnesium (54) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Magnesium (54) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Calcium (55) | Running Exhaust (1) |
Sulfate PM Calculator |
| Calcium (55) | Start Exhaust (2) |
Sulfate PM Calculator |
| Calcium (55) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Calcium (55) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Calcium (55) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Calcium (55) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Calcium (55) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Titanium (56) | Running Exhaust (1) |
Sulfate PM Calculator |
| Titanium (56) | Start Exhaust (2) |
Sulfate PM Calculator |
| Titanium (56) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Titanium (56) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Titanium (56) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Titanium (56) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Titanium (56) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Silicon (57) | Running Exhaust (1) |
Sulfate PM Calculator |
| Silicon (57) | Start Exhaust (2) |
Sulfate PM Calculator |
| Silicon (57) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Silicon (57) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Silicon (57) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Silicon (57) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Silicon (57) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Aluminum (58) | Running Exhaust (1) |
Sulfate PM Calculator |
| Aluminum (58) | Start Exhaust (2) |
Sulfate PM Calculator |
| Aluminum (58) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Aluminum (58) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Aluminum (58) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Aluminum (58) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Aluminum (58) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Iron (59) | Running Exhaust (1) |
Sulfate PM Calculator |
| Iron (59) | Start Exhaust (2) |
Sulfate PM Calculator |
| Iron (59) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Iron (59) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Iron (59) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Iron (59) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Iron (59) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Primary Exhaust PM2.5 - Total (110) | Start Exhaust (2) |
Sulfate PM Calculator |
| Primary Exhaust PM2.5 - Total (110) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Primary Exhaust PM2.5 - Total (110) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Primary Exhaust PM2.5 - Total (110) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Primary Exhaust PM2.5 - Total (110) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Primary Exhaust PM2.5 - Total (110) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Organic Carbon (111) | Running Exhaust (1) |
Sulfate PM Calculator |
| Organic Carbon (111) | Start Exhaust (2) |
Sulfate PM Calculator |
| Organic Carbon (111) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Organic Carbon (111) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Organic Carbon (111) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Organic Carbon (111) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Organic Carbon (111) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Elemental Carbon (112) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Elemental Carbon (112) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Elemental Carbon (112) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Running Exhaust (1) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Start Exhaust (2) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Sulfate Particulate (115) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Composite - NonECPM (118) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Composite - NonECPM (118) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Composite - NonECPM (118) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Running Exhaust (1) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Start Exhaust (2) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| H2O (aerosol) (119) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Running Exhaust (1) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Start Exhaust (2) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| CMAQ5.0 Unspeciated (PMOTHR) (121) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Running Exhaust (1) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Start Exhaust (2) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Extended Idle Exhaust (90) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Auxiliary Power Exhaust (91) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Crankcase Running Exhaust (15) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Crankcase Start Exhaust (16) |
Sulfate PM Calculator |
| Non-carbon Organic Matter (NCOM) (122) | Crankcase Extended Idle Exhaust (17) |
Sulfate PM Calculator |
| CB05 Mechanism (1000) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_MEOH (1011) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Running Exhaust (1) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Start Exhaust (2) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_MEOH (1011) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Start Exhaust (2) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Evap Permeation (11) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_MEOH (1011) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Evap Permeation (11) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Evap Fuel Vapor Venting (12) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Evap Fuel Leaks (13) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_MEOH (1011) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Crankcase Running Exhaust (15) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_MEOH (1011) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Crankcase Start Exhaust (16) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Crankcase Extended Idle Exhaust (17) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Refueling Displacement Vapor Loss (18) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Refueling Spillage Loss (19) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Extended Idle Exhaust (90) |
TOG Speciation Calculator |
| CB05 Mechanism (1000) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| NonHAPTOG (88) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_ALD2 (1001) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_ALDX (1002) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_ETH (1005) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_ETHA (1006) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_FORM (1008) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_IOLE (1009) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_ISOP (1010) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_OLE (1012) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_PAR (1013) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_TERP (1014) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_TOL (1015) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_UNK (1016) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_UNR (1017) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| CB05_XYL (1018) | Auxiliary Power Exhaust (91) |
TOG Speciation Calculator |
| Total Gaseous Hydrocarbons (1) | Evap Fuel Vapor Venting (12) |
Tank Vapor Venting Calculator |