Aerospace Manufacturing and Rework Facilities: National Emission Standards for Hazardous Air Pollutants (NESHAP)
On this page:
Rule Summary
The Hazardous Air Pollutants (HAP) listed in Section 112(b)(1) of the Clean Air Act emitted by aerospace facilities that are covered by this final rule include:
- chromium,
- cadmium,
- methylene chloride,
- toluene,
- xylene,
- methyl ethyl ketone,
- ethylene glycol and
- glycol ethers.
This National Emission Standards for Hazardous Air Pollutants (NESHAP) rule will reduce nationwide emissions of HAP from at least 2,869 major source aerospace manufacturing and rework facilities by approximately 112,600 Mg (123,700tons).
Rule History
08/3/2016 - Direct Final Rule
08/3/2016 - Parallel Proposal
12/7/2015 - Final Rule
02/17/2015 – Proposed Rule
12/08/2000 – Final Rule
01/24/2000 – Proposed Rule
09/01/1998 – Final Rule
03/27/1998 – Final Rule (To the October 1996 Proposal)
03/27/1998 – Proposed Rule
12/17/1996 – Final Rule Correction
10/29/1996 – Proposed Rule
02/09/1996 – Correction and Clarification of Final Rule
09/01/1995 – Final Rule
06/06/1994 – Proposed Rule
Additional Resources
View the supporting documents in the docket folder to find additional related documents to this rule.
Related Rules
Compliance
Transportation Environmental Resource Center (TERC) Transportation Compliance Summary Tool -- Air
Summary of Requirements for Implementing the Aerospace Manufacturing and Rework Facilities NESHAP
Applicability Determination Index (ADI). The ADI is maintained by EPA's Office of Enforcement and Compliance Assurance (OECA) and provides a data base of memoranda dealing with applicability issues. The database is searchable by Subpart.